1
2 menu "Macintosh device drivers"
3 depends on PPC || MAC
4
5 config ADB
6 bool "Apple Desktop Bus (ADB) support"
7 depends on MAC || (PPC_PMAC && PPC32)
8 help
9 Apple Desktop Bus (ADB) support is for support of devices which
10 are connected to an ADB port. ADB devices tend to have 4 pins.
11 If you have an Apple Macintosh prior to the iMac, an iBook or
12 PowerBook, or a "Blue and White G3", you probably want to say Y
13 here. Otherwise say N.
14
15 config ADB_MACII
16 bool "Include Mac II ADB driver"
17 depends on ADB && MAC
18 help
19 Say Y here if want your kernel to support Macintosh systems that use
20 the Mac II style ADB. This includes the II, IIx, IIcx, SE/30, IIci,
21 Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and
22 Centris 650.
23
24 config ADB_MACIISI
25 bool "Include Mac IIsi ADB driver"
26 depends on ADB && MAC
27 help
28 Say Y here if want your kernel to support Macintosh systems that use
29 the Mac IIsi style ADB. This includes the IIsi, IIvi, IIvx, Classic
30 II, LC, LC II, LC III, Performa 460, and the Performa 600.
31
32 config ADB_IOP
33 bool "Include IOP (IIfx/Quadra 9x0) ADB driver"
34 depends on ADB && MAC
35 help
36 The I/O Processor (IOP) is an Apple custom IC designed to provide
37 intelligent support for I/O controllers. It is described at
38 <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct
39 support for it, say 'Y' here.
40
41 config ADB_PMU68K
42 bool "Include PMU (Powerbook) ADB driver"
43 depends on ADB && MAC
44 help
45 Say Y here if want your kernel to support the m68k based Powerbooks.
46 This includes the PowerBook 140, PowerBook 145, PowerBook 150,
47 PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170,
48 PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520,
49 PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250,
50 PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c.
51
52 # we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU
53 config ADB_CUDA
54 bool "Support for CUDA based Macs and PowerMacs"
55 depends on (ADB || PPC_PMAC) && !PPC_PMAC64
56 help
57 This provides support for CUDA based Macintosh and Power Macintosh
58 systems. This includes many m68k based Macs (Color Classic, Mac TV,
59 Performa 475, Performa 520, Performa 550, Performa 575,
60 Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and
61 Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs,
62 the Blue&White G3 and the "Yikes" G4 (PCI Graphics). All later
63 models should use CONFIG_ADB_PMU instead. It is safe to say Y here
64 even if your machine doesn't have a CUDA.
65
66 If unsure say Y.
67
68 config ADB_PMU
69 bool "Support for PMU based PowerMacs"
70 depends on PPC_PMAC
71 help
72 On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the
73 PMU is an embedded microprocessor whose primary function is to
74 control system power, and battery charging on the portable models.
75 The PMU also controls the ADB (Apple Desktop Bus) which connects to
76 the keyboard and mouse on some machines, as well as the non-volatile
77 RAM and the RTC (real time clock) chip. Say Y to enable support for
78 this device; you should do so if your machine is one of those
79 mentioned above.
80
81 config PMAC_SMU
82 bool "Support for SMU based PowerMacs"
83 depends on PPC_PMAC64
84 help
85 This option adds support for the newer G5 iMacs and PowerMacs based
86 on the "SMU" system control chip which replaces the old PMU.
87 If you don't know, say Y.
88
89 config PMAC_APM_EMU
90 tristate "APM emulation"
91 depends on PPC_PMAC && PPC32 && PM
92
93 config PMAC_MEDIABAY
94 bool "Support PowerBook hotswap media bay"
95 depends on PPC_PMAC && PPC32
96 help
97 This option adds support for older PowerBook's hotswap media bay
98 that can contains batteries, floppy drives, or IDE devices. PCI
99 devices are not fully supported in the bay as I never had one to
100 try with
101
102 # made a separate option since backlight may end up beeing used
103 # on non-powerbook machines (but only on PMU based ones AFAIK)
104 config PMAC_BACKLIGHT
105 bool "Backlight control for LCD screens"
106 depends on ADB_PMU && (BROKEN || !PPC64)
107 help
108 Say Y here to build in code to manage the LCD backlight on a
109 Macintosh PowerBook. With this code, the backlight will be turned
110 on and off appropriately on power-management and lid-open/lid-closed
111 events; also, the PowerBook button device will be enabled so you can
112 change the screen brightness.
113
114 config ADB_MACIO
115 bool "Include MacIO (CHRP) ADB driver"
116 depends on ADB && PPC_CHRP && !PPC_PMAC64
117 help
118 Say Y here to include direct support for the ADB controller in the
119 Hydra chip used on PowerPC Macintoshes of the CHRP type. (The Hydra
120 also includes a MESH II SCSI controller, DBDMA controller, VIA chip,
121 OpenPIC controller and two RS422/Geoports.)
122
123 config INPUT_ADBHID
124 bool "Support for ADB input devices (keyboard, mice, ...)"
125 depends on ADB && INPUT=y
126 help
127 Say Y here if you want to have ADB (Apple Desktop Bus) HID devices
128 such as keyboards, mice, joysticks, trackpads or graphic tablets
129 handled by the input layer. If you say Y here, make sure to say Y to
130 the corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV),
131 "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface
132 support" (CONFIG_INPUT_EVDEV) as well.
133
134 If unsure, say Y.
135
136 config MAC_EMUMOUSEBTN
137 bool "Support for mouse button 2+3 emulation"
138 depends on INPUT_ADBHID
139 help
140 This provides generic support for emulating the 2nd and 3rd mouse
141 button with keypresses. If you say Y here, the emulation is still
142 disabled by default. The emulation is controlled by these sysctl
143 entries:
144 /proc/sys/dev/mac_hid/mouse_button_emulation
145 /proc/sys/dev/mac_hid/mouse_button2_keycode
146 /proc/sys/dev/mac_hid/mouse_button3_keycode
147
148 If you have an Apple machine with a 1-button mouse, say Y here.
149
150 config THERM_WINDTUNNEL
151 tristate "Support for thermal management on Windtunnel G4s"
152 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
153 help
154 This driver provides some thermostat and fan control for the desktop
155 G4 "Windtunnel"
156
157 config THERM_ADT746X
158 tristate "Support for thermal mgmnt on laptops with ADT 746x chipset"
159 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
160 help
161 This driver provides some thermostat and fan control for the
162 iBook G4, and the ATI based aluminium PowerBooks, allowing slighlty
163 better fan behaviour by default, and some manual control.
164
165 config THERM_PM72
166 tristate "Support for thermal management on PowerMac G5"
167 depends on I2C && I2C_POWERMAC && PPC_PMAC64
168 help
169 This driver provides thermostat and fan control for the desktop
170 G5 machines.
171
172 config WINDFARM
173 tristate "New PowerMac thermal control infrastructure"
174
175 config WINDFARM_PM81
176 tristate "Support for thermal management on iMac G5"
177 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
178 select I2C_POWERMAC
179 help
180 This driver provides thermal control for the iMacG5
181
182 config WINDFARM_PM91
183 tristate "Support for thermal management on PowerMac9,1"
184 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
185 select I2C_POWERMAC
186 help
187 This driver provides thermal control for the PowerMac9,1
188 which is the recent (SMU based) single CPU desktop G5
189
190 config WINDFARM_PM112
191 tristate "Support for thermal management on PowerMac11,2"
192 depends on WINDFARM && I2C && PMAC_SMU
193 select I2C_POWERMAC
194 help
195 This driver provides thermal control for the PowerMac11,2
196 which are the recent dual and quad G5 machines using the
197 970MP dual-core processor.
198
199 config ANSLCD
200 tristate "Support for ANS LCD display"
201 depends on ADB_CUDA && PPC_PMAC
202
203 endmenu
This page was automatically generated by the
LXR engine.
Visit the LXR main site for more
information.