Re: How to boot 2.6 kernel using hp ski simulator ???

From: Peter Chubb <peter_at_chubb.wattle.id.au>
Date: 2006-11-27 19:48:45
Please check out http://www.gelato.unsw.edu.au/IA64wiki/SkiSimulator
for lots of info on Ski.

It works fine with Linux 2.6; and hugepage work too.

> 1) I used 'make ARCH=ia64 menuconfig' to configure and followed the
> steps to get kernel image of version 2.6 ! I also selected the generic
> type as Ski-simulator and also selected the HP-ski drivers something
> simscsi,etc.etc.

I suggest you start with
	make sim_defconfig

Your symptoms look like a misconigured or misbuilt vmlinux.  The sim_defconfig

If you're running on IA32, then you need something like:
	make CROSS_COMPILE=ia64-linux-gnu ARCH=ia64 boot 
to build kernel and bootloader.

You need to get or build yourself a disk image.  Instructions for
building at http://www.gelato.unsw.edu.au/IA64wiki/skidiskimage 




--
Dr Peter Chubb  http://www.gelato.unsw.edu.au  peterc AT gelato.unsw.edu.au
http://www.ertos.nicta.com.au           ERTOS within National ICT Australia
-
To unsubscribe from this list: send the line "unsubscribe linux-ia64" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Received on Mon Nov 27 19:51:30 2006

This archive was generated by hypermail 2.1.8 : 2006-11-27 19:51:56 EST