On Mon, 12 Sep 2005 22:37:55 -0700 (PDT), "David S. Miller" <davem@davemloft.net> wrote: >From: Keith Owens <kaos@sgi.com> >Date: Tue, 13 Sep 2005 15:22:17 +1000 > >> 2.6.14-rc1 + kdb on ia64 (SGI Altix). >> >> tg3.c:v3.39 (September 5, 2005) >> ACPI: PCI Interrupt 0001:01:04.0[A]: no GSI >> BRIDGE ERR_STATUS 0x800 >> BRIDGE ERR_STATUS 0x800 >> PCI BRIDGE ERROR: int_status is 0x800 for 011c32:slab0:widget15:bus0 >> Dumping relevant 011c32:slab0:widget15:bus0 registers for each bit set... >> 11: PCI bus device select timeout >> PCI Error Address Register: 0x3000000316808 >> PCI Error Address: 0x316808 >> PIC Multiple Interrupt Register is 0x800 >> 11: PCI bus device select timeout >> >> Followed by a machine check and reboot :( 2.6.13 worked fine. Any >> ideas which patch to backout this time? > >Does copying over the 2.6.13 tg3.[ch] driver over into your >2.6.14-rc1 tree make it work? No, the 2.6.13 driver in 2.6.14-rc1 has exactly the same problem. The last time that tg3 broke like this, it was because of the patch below, in 2.6.13-rc6. That was backed out in 2.6.13-rc7. Was the PCI patch (or equivalent) reinstated in 2.6.14-rc1? From: John W. Linville <linville@tuxdriver.com> Date: Fri, 5 Aug 2005 01:06:10 +0000 (-0700) Subject: [PATCH] PCI: restore BAR values after D3hot->D0 for devices that need it X-Git-Tag: v2.6.13-rc6 X-Git-Url: http://kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=fec59a711eef002d4ef9eb8de09dd0a26986eb77 - To unsubscribe from this list: send the line "unsubscribe linux-ia64" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.htmlReceived on Tue Sep 13 16:18:17 2005
This archive was generated by hypermail 2.1.8 : 2005-09-13 16:18:23 EST