RE: IA64 test report: 2.6.8 /tiger 2004-8-18: 9/9 pass, SCI caused kernel unaligned access

From: Yu, Luming <luming.yu_at_intel.com>
Date: 2004-09-15 12:16:26
We have ever fixed a unaligned access issue before,
http://bugzilla.kernel.org/show_bug.cgi?id=1533
But that patch just make the problem happen to disappear.

Thanks,
Luming

>-----Original Message-----
>From: Wang, Zhenyu Z 
>Sent: Wednesday, August 18, 2004 4:24 PM
>To: linux-ia64@vger.kernel.org
>Cc: linux-acpi
>Subject: IA64 test report: 2.6.8 /tiger 2004-8-18: 9/9 pass, 
>SCI caused kernel unaligned access
>
> 
>ACPI Test Report  for 2.6 ia64 kernel 
>=========================
>Hardware Configuration:
>------------------------------
>System Name: ACPI-Tiger
>System Type: 4 way 900 Itanium2, tiger
>M/B revision: N/A
>Processor version: N/A
>Firmware Versions: N/A
>I/O configuration summary:
>	MPT scsi host driver
>	Seagate ST318406LC boot drive
>	IDE floppy and CDROM
>	Serial console
>	USB mouse 
>	USB keyboard
>	Ethernet Pro 1000
>
>Software Configuration:
>-----------------------------
>	1.Bk pull form lia64.bkbits.net/linux-ia64-2.5 on 8/17(Shanghai
>time)
>	2.bk pull from linux-acpi.bkbits.net/linux-acpi-test-2.6.8 on
>8/17(Shanghai time)
>	
>ACPI Features Tested: (prioritized).
>-----------------------------	
>1. Boot 					tested ok
>2. serial console				tested ok
>3. ATI (run X window system)		 	tested ok
>4. usb keyboard				tested ok
>5. USB mouse					tested ok
>6. NIC (eg. Ping or ftp)			tested ok
>7. IDE (eg. r/w floppy or CDROM)		tested ok
>8. SCI (eg. Press power button)		tested ok
>9. Soft Power off 				tested ok
>
>Issue Highlight:
>-------------------
>kernel unaligned access when pressing power button..see dmesg 
>log below.
>
>Logs:
>-------
>Linux version 2.6.8 (root@tiger42) (gcc version 3.4.1 20040702 
>(Red Hat Linux 3.4.1-2)) #2 SMP Tue Aug 17 10:24:16 EDT 2004
>EFI v1.10 by INTEL: SALsystab=0x3fe4c8c0 ACPI=0x3ff84000 ACPI 
>2.0=0x3ff83000 MPS=0x3ff82000 SMBIOS=0xf0000
>booting generic kernel on platform dig
>ACPI: RSDP (v002 INTEL                                     ) @ 
>0x000000003ff83000
>ACPI: XSDT (v001 INTEL  SR870BN4 0x01072002 MSFT 0x00010013) @ 
>0x000000003ff83090
>ACPI: FADT (v003 INTEL  SR870BN4 0x01072002 MSFT 0x00010013) @ 
>0x000000003ff83138
>ACPI: MADT (v001 INTEL  SR870BN4 0x01072002 MSFT 0x00010013) @ 
>0x000000003ff83230
>ACPI: DSDT (v001  Intel SR870BN4 0x00000000 MSFT 0x0100000d) @ 
>0x0000000000000000
>Warning: acpi_table_parse(ACPI_SRAT) returned 0!
>Warning: acpi_table_parse(ACPI_SLIT) returned 0!
>efi.trim_top: ignoring 4KB of memory at 0x0 due to granule hole at 0x0
>efi.trim_top: ignoring 24KB of memory at 0x1000 due to granule 
>hole at 0x0
>efi.trim_top: ignoring 8KB of memory at 0x7000 due to granule 
>hole at 0x0
>efi.trim_top: ignoring 484KB of memory at 0x9000 due to 
>granule hole at 0x0
>efi.trim_top: ignoring 4KB of memory at 0x84000 due to granule 
>hole at 0x0
>efi.trim_top: ignoring 108KB of memory at 0x85000 due to 
>granule hole at 0x0
>efi.trim_bottom: ignoring 15360KB of memory at 0x100000 due to 
>granule hole at 0x0
>SAL 3.1: Intel Corp                       SR870BN4             
>            version 3.0
>SAL Platform features: BusLock IRQ_Redirection
>SAL: AP wakeup using external interrupt vector 0xf0
>iosapic_system_init: Disabling PC-AT compatible 8259 interrupts
>ACPI: Local APIC address 0xc0000000fee00000
>PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0xc618) 
>vector 30
>register_intr: changing vector 39 from IO-SAPIC-edge to IO-SAPIC-level
>4 CPUs available, 4 CPUs total
>Registering legacy COM ports for serial console
>MCA related initialization done
>Virtual mem_map starts at 0xa0007fffffc80000
>On node 0 totalpages: 63422
>  DMA zone: 63422 pages, LIFO batch:4
>  Normal zone: 0 pages, LIFO batch:1
>  HighMem zone: 0 pages, LIFO batch:1
>Built 1 zonelists
>Kernel command line: BOOT_IMAGE=scsi0:\EFI\redhat\vmlinux-2.6 
>root=/dev/sda2 console=ttyS1,9600n8 console=tty0 ro
>PID hash table entries: 4096 (order 12: 65536 bytes)
>CPU 0: base freq=199.458MHz, ITC ratio=14/2, ITC 
>freq=1396.206MHz+/--1ppm
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 6, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 5, 524288 bytes)
>Placing software IO TLB between 0xe000000001668000 - 0xe000000001868000
>Memory: 1005760k/1014752k available (7785k code, 20032k 
>reserved, 2941k data, 368k init)
>McKinley Errata 9 workaround not needed; disabling it
>numa_policy_init: interleaving failed
>Calibrating delay loop... 2089.76 BogoMIPS
>Mount-cache hash table entries: 1024 (order: 0, 16384 bytes)
> tbxface-0117 [02] acpi_load_tables      : ACPI Tables 
>successfully acquired
>Parsing all Control 
>Methods:.......................................................
>...............................................................
>............................................
>Table [DSDT](id F004) - 1385 Objects with 110 Devices 162 
>Methods 40 Regions
>ACPI Namespace successfully loaded at root a000000100acc2c0
>evxfevnt-0082 [03] acpi_enable           : System is already 
>in ACPI mode
>Boot processor id 0x0/0xc618
>task migration cache decay timeout: 10 msecs.
>CPU 1: synchronized ITC with CPU 0 (last diff 13 cycles, 
>maxerr 520 cycles)
>CPU 1: base freq=199.458MHz, ITC ratio=14/2, ITC 
>freq=1396.206MHz+/--1ppm
>Calibrating delay loop... 2089.76 BogoMIPS
>CPU 2: synchronized ITC with CPU 0 (last diff 13 cycles, 
>maxerr 520 cycles)
>CPU 2: base freq=199.458MHz, ITC ratio=14/2, ITC 
>freq=1396.206MHz+/--1ppm
>Calibrating delay loop... 2089.76 BogoMIPS
>CPU 3: synchronized ITC with CPU 0 (last diff 13 cycles, 
>maxerr 520 cycles)
>CPU 3: base freq=199.458MHz, ITC ratio=14/2, ITC 
>freq=1396.206MHz+/--1ppm
>Calibrating delay loop... 2089.76 BogoMIPS
>Brought up 4 CPUs
>Total of 4 processors activated (8359.04 BogoMIPS).
>CPU0:  online
> domain 0: span 000f
>  groups: 0001 0002 0004 0008
>  domain 1: span 000f
>   groups: 000f
>CPU1:  online
> domain 0: span 000f
>  groups: 0002 0004 0008 0001
>  domain 1: span 000f
>   groups: 000f
>CPU2:  online
> domain 0: span 000f
>  groups: 0004 0008 0001 0002
>  domain 1: span 000f
>   groups: 000f
>CPU3:  online
> domain 0: span 000f
>  groups: 0008 0001 0002 0004
>  domain 1: span 000f
>   groups: 000f
>NET: Registered protocol family 16
>ACPI: Subsystem revision 20040715
>kernel unaligned access to 0xe00000003fef1f5f, ip=0xa000000100353320
>kernel unaligned access to 0xe00000003fef1f6e, ip=0xa000000100353320
>kernel unaligned access to 0xe00000003fef1f95, ip=0xa000000100353320
>evgpeblk-0980 [07] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 
>4 regs at 0000000000000C28 on int 0x9
>evgpeblk-0989 [07] ev_create_gpe_block   : Found 6 Wake, 
>Enabled 1 Runtime GPEs in this block
>Completing Region/Field/Buffer/Package 
>initialization:................................................
>........................
>Initialized 40/40 Regions 1/1 Fields 16/16 Buffers 15/15 
>Packages (1394 nodes)
>Executing all Device _STA and_INI 
>methods:.......................................................
>..................................................
>105 Devices found containing: 105 _STA, 3 _INI methods
>ACPI: Interpreter enabled
>ACPI: Using IOSAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (00:00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.H2PB._PRT]
>ACPI: PCI Root Bridge [PCI1] (00:02)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.P2PA._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.P2PB._PRT]
>ACPI: PCI Root Bridge [PCI3] (00:08)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI3.P2PA._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI3.P2PB._PRT]
>ACPI: PCI Root Bridge [PCI4] (00:0e)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI4.P2PA._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI4.P2PB._PRT]
>ACPI: Device [CSFF] status [00000008]: functional but not 
>present; setting present
>ACPI: PCI Root Bridge [CSFF] (00:ff)
>SCSI subsystem initialized
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>GSI 16 (level, low) -> CPU 0 (0xc618) vector 48
>ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 48
>GSI 19 (level, low) -> CPU 0 (0xc618) vector 49
>ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 49
>GSI 23 (level, low) -> CPU 0 (0xc618) vector 50
>ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 50
> pci_irq-0314 [31] acpi_pci_irq_derive   : Unable to derive 
>IRQ for device 0000:00:1f.1
>ACPI: PCI interrupt 0000:00:1f.1[A]: no GSI
>GSI 18 (level, low) -> CPU 0 (0xc618) vector 51
>ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 51
>GSI 71 (level, low) -> CPU 0 (0xc618) vector 52
>ACPI: PCI interrupt 0000:03:1f.0[A] -> GSI 71 (level, low) -> IRQ 52
>GSI 24 (level, low) -> CPU 0 (0xc618) vector 53
>ACPI: PCI interrupt 0000:06:01.0[A] -> GSI 24 (level, low) -> IRQ 53
>GSI 28 (level, low) -> CPU 0 (0xc618) vector 54
>ACPI: PCI interrupt 0000:06:02.0[A] -> GSI 28 (level, low) -> IRQ 54
>GSI 29 (level, low) -> CPU 0 (0xc618) vector 55
>ACPI: PCI interrupt 0000:06:02.1[B] -> GSI 29 (level, low) -> IRQ 55
>GSI 47 (level, low) -> CPU 0 (0xc618) vector 56
>ACPI: PCI interrupt 0000:06:1f.0[A] -> GSI 47 (level, low) -> IRQ 56
>GSI 119 (level, low) -> CPU 0 (0xc618) vector 57
>ACPI: PCI interrupt 0000:09:1f.0[A] -> GSI 119 (level, low) -> IRQ 57
>GSI 95 (level, low) -> CPU 0 (0xc618) vector 58
>ACPI: PCI interrupt 0000:0b:1f.0[A] -> GSI 95 (level, low) -> IRQ 58
>GSI 167 (level, low) -> CPU 0 (0xc618) vector 59
>ACPI: PCI interrupt 0000:0f:1f.0[A] -> GSI 167 (level, low) -> IRQ 59
>GSI 143 (level, low) -> CPU 0 (0xc618) vector 60
>ACPI: PCI interrupt 0000:11:1f.0[A] -> GSI 143 (level, low) -> IRQ 60
>perfmon: version 2.0 IRQ 238
>perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits)
>PAL Information Facility v0.5
>perfmon: added sampling format default_format
>perfmon_default_smpl: default_format v2.0 registered
>Total HugeTLB memory allocated, 0
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>udf: registering filesystem
>Initializing Cryptographic API
>ACPI: Power Button (FF) [PWRF]
>ACPI: Processor [CPU0] (supports C1)
>ACPI: Processor [CPU1] (supports C1)
>ACPI: Processor [CPU2] (supports C1)
>ACPI: Processor [CPU3] (supports C1)
>EFI Time Services Driver v0.4
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ 
>sharing disabled
>acpi_serial_port: zero-length IO port range?
>ttyS0 at I/O 0x3f8 (irq = 44) is a 16550A
>acpi_serial_port: zero-length IO port range?
>ttyS1 at I/O 0x2f8 (irq = 45) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
>loop: loaded (max 8 devices)
>Intel(R) PRO/1000 Network Driver - version 5.2.52-k4
>Copyright (c) 1999-2004 Intel Corporation.
>ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 51
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>ACPI: PCI interrupt 0000:06:01.0[A] -> GSI 24 (level, low) -> IRQ 53
>e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
>Ethernet Channel Bonding Driver: v2.6.0 (January 14, 2004)
>bonding: Warning: either miimon or arp_interval and 
>arp_ip_target module parameters must be specified, otherwise 
>bonding will not detect link failures! see bonding.txt for details.
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override 
>with idebus=xx
>hda: MATSHITADVD-ROM SR-8177, ATAPI CD/DVD-ROM drive
>hdb: LS-120/240 00 UHD Floppy, ATAPI FLOPPY drive
>Using anticipatory io scheduler
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 34
>hda: ATAPI 24X DVD-ROM drive, 256kB Cache
>Uniform CD-ROM driver Revision: 3.20
>st: Version 20040403, fixed bufsize 32768, s/g segs 256
>osst :I: Tape driver with OnStream support version 0.99.1
>osst :I: $Id: osst.c,v 1.70 2003/12/23 14:22:12 wriede Exp $
>Fusion MPT base driver 3.01.09
>Copyright (c) 1999-2004 LSI Logic Corporation
>ACPI: PCI interrupt 0000:06:02.0[A] -> GSI 28 (level, low) -> IRQ 54
>mptbase: Initiating ioc0 bringup
>ioc0: 53C1030: Capabilities={Initiator}
>ACPI: PCI interrupt 0000:06:02.1[B] -> GSI 29 (level, low) -> IRQ 55
>mptbase: Initiating ioc1 bringup
>ioc1: 53C1030: Capabilities={Initiator}
>Fusion MPT SCSI Host driver 3.01.09
>scsi0 : ioc0: LSI53C1030, FwRev=01030600h, Ports=1, MaxQ=255, IRQ=54
>  Vendor: MAXTOR    Model: ATLASU320_18_SCA  Rev: B120
>  Type:   Direct-Access                      ANSI SCSI revision: 03
>SCSI device sda: 35916548 512-byte hdwr sectors (18389 MB)
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3
>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
>  Vendor: ESG-SHV   Model: SCA HSBP M17      Rev: 0101
>  Type:   Processor                          ANSI SCSI revision: 02
>Attached scsi generic sg1 at scsi0, channel 0, id 6, lun 0,  type 3
>scsi1 : ioc1: LSI53C1030, FwRev=01030600h, Ports=1, MaxQ=255, IRQ=55
>ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 50
>ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller
>ehci_hcd 0000:00:1d.7: irq 50, pci mem c0000000f9ff0000
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>PCI: slot 0000:00:1d.7 has incorrect PCI cache line size of 0 
>bytes, correcting to 128
>ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) 
>Driver (PCI)
>ohci_hcd: block sizes: ed 80 td 96
>USB Universal Host Controller Interface driver v2.2
>ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 48
>uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB (ICH4) USB UHCI #1
>uhci_hcd 0000:00:1d.0: irq 48, io base 0000000000005cc0
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 49
>uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB (ICH4) USB UHCI #2
>uhci_hcd 0000:00:1d.1: irq 49, io base 0000000000005ce0
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>usb 2-2: new full speed USB device using address 2
>hub 2-2:1.0: USB hub found
>hub 2-2:1.0: 4 ports detected
>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>mice: PS/2 mouse device common for all mice
>EFI Variables Facility v0.08 2004-May-17
>usb 2-2.1: new low speed USB device using address 3
>input<6>NET: Registered protocol family 2
>: USB HID v1.10 Keyboard [SOLIDTEK USB Composite Keyboard] on 
>usb-0000:00:1d.0-2.1
>IP: routing cache hash table of 16384 buckets, 256Kbytes
>drivers/usb/input/hid-core.c: ctrl urb status -32 received
>drivers/usb/input/hid-core.c: ctrl urb status -32 received
>drivers/usb/input/hid-core.c: ctrl urb status -32 received
>input,hiddev96: USB HID v1.10 Device [SOLIDTEK USB Composite 
>Keyboard] on usb-0000:00:1d.0-2.1
>TCP: Hash tables configured (established 131072 bind 65536)
>arp_tables: (C) 2002 David S. Miller
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>VFS: Mounted root (ext3 filesystem) readonly.
>Freeing unused kernel memory: 368kB freed
>EXT3 FS on sda2, internal journal
>device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
>hda: packet command error: status=0x51 { DriveReady 
>SeekComplete Error }
>hda: packet command error: error=0x54
>cdrom: open failed.
>Adding 2047968k swap on /dev/sda3.  Priority:-1 extents:1
>e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
>hda: packet command error: status=0x51 { DriveReady 
>SeekComplete Error }
>hda: packet command error: error=0x54
>cdrom: open failed.
>hda: packet command error: status=0x51 { DriveReady 
>SeekComplete Error }
>hda: packet command error: error=0x54
>cdrom: open failed.
>ide-floppy driver 0.99.newide
>hdb: 123264kB, 246528 blocks, 512 sector size
>hdb: 123264kB, 963/8/32 CHS, 1416 kBps, 512 sector size, 1500 rpm
> hdb: unknown partition table
> hdb: unknown partition table
> hdb: unknown partition table
>drivers/usb/input/hid-input.c: event field not found
>drivers/usb/input/hid-input.c: event field not found
> hdb: unknown partition table
>usb 3-2: new low speed USB device using address 2
>drivers/usb/input/hid-core.c: ctrl urb status -32 received
>input: USB HID v1.00 Mouse [04b3:310b] on usb-0000:00:1d.1-2
> hdb: unknown partition table
>kernel unaligned access to 0xe00000003fef1f53, ip=0xa0000001003528e0
>kernel unaligned access to 0xe00000003fef1f5f, ip=0xa0000001003528e0
>kernel unaligned access to 0xe00000003fef1f53, ip=0xa00000010033a071
>kernel unaligned access to 0xe00000003fef1f5f, ip=0xa00000010033a080
>kernel unaligned access to 0xe00000003fef1f53, ip=0xa0000001003528e0
>kernel unaligned access to 0xe00000003fef1f5f, ip=0xa0000001003528e0
>kernel unaligned access to 0xe00000003fef1f53, ip=0xa00000010033a071
>kernel unaligned access to 0xe00000003fef1f5f, ip=0xa00000010033a080
>
>           CPU0       CPU1       CPU2       CPU3       
> 28:          0          0          0          0          
>LSAPIC  cpe_poll
> 29:          0          0          0          0          
>LSAPIC  cmc_poll
> 30:          0          0          0          0  
>IO-SAPIC-level  cpe_hndlr
> 31:          0          0          0          0          
>LSAPIC  cmc_hndlr
> 34:          2       1097         97         30   IO-SAPIC-edge  ide0
> 39:          0          5          0          0  IO-SAPIC-level  acpi
> 45:          0        599          6          0   
>IO-SAPIC-edge  serial
> 48:          0       4755        154          0  
>IO-SAPIC-level  uhci_hcd
> 49:          1       2265         59          1  
>IO-SAPIC-level  uhci_hcd
> 50:          0          2          2          0  
>IO-SAPIC-level  ehci_hcd
> 51:         36      60531      16298       1220  IO-SAPIC-level  eth0
> 54:         72      29024       3505        326  IO-SAPIC-level  ioc0
> 55:          0         29          0          0  IO-SAPIC-level  ioc1
>232:          0          0          0          0          
>LSAPIC  mca_rdzv
>238:          0          0          0          0          
>LSAPIC  perfmon
>239:   13022778   13018928   13018740   13018512          LSAPIC  timer
>240:          0          0          0          0          
>LSAPIC  mca_wkup
>254:        799        643        784        918          LSAPIC  IPI
>NMI:          0          0          0          0 
>ERR:          0
>
>00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM 
>(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02) (prog-if 
>00 [UHCI])
>	Subsystem: Intel Corp.: Unknown device 3402
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- 
>VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 48
>	Region 4: I/O ports at 5cc0 [size=32]
>
>00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM 
>(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 02) (prog-if 
>00 [UHCI])
>	Subsystem: Intel Corp.: Unknown device 3402
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- 
>VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 49
>	Region 4: I/O ports at 5ce0 [size=32]
>
>00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) 
>USB 2.0 EHCI Controller (rev 02) (prog-if 20 [EHCI])
>	Subsystem: Intel Corp.: Unknown device 3402
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- 
>VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin D routed to IRQ 50
>	Region 0: Memory at 00000000f9ff0000 (32-bit, non-prefetchable)
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
>PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] #0a [2080]
>
>00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub 
>interface to PCI Bridge (rev 82) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- 
>VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
>	I/O behind bridge: 00006000-00006fff
>	Memory behind bridge: fa000000-fbffffff
>	Expansion ROM at 0000000000006000 [disabled] [size=4K]
>	BridgeCtl: Parity+ SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
>
>00:1f.0 ISA bridge: Intel Corp. 82801DB/DBL (ICH4/ICH4-L) LPC 
>Bridge (rev 02)
>	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- 
>VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>
>00:1f.1 IDE interface: Intel Corp. 82801DB/DBL (ICH4/ICH4-L) 
>UltraATA-100 IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
>	Subsystem: Intel Corp.: Unknown device 3402
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- 
>VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 0
>	Region 0: I/O ports at <unassigned>
>	Region 1: I/O ports at <unassigned>
>	Region 2: I/O ports at <unassigned>
>	Region 3: I/O ports at <unassigned>
>	Region 4: I/O ports at 1000 [size=16]
>
>01:00.0 Ethernet controller: Intel Corp. 82540EM Gigabit 
>Ethernet Controller (rev 02)
>	Subsystem: Intel Corp.: Unknown device 3402
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ 
>VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64 (63750ns min), Cache Line Size 20
>	Interrupt: pin A routed to IRQ 51
>	Region 0: Memory at 00000000fbfe0000 (32-bit, non-prefetchable)
>	Region 2: I/O ports at 6cc0 [size=64]
>	Capabilities: [dc] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
>PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [e4] PCI-X non-bridge device.
>		Command: DPERE- ERO+ RBC=2 OST=0
>		Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- 
>USC-, DC=simple, DMMRBC=2, DMOST=0, DMCRS=1, RSCEM-
>	Capabilities: [f0] Message Signalled Interrupts: 64bit+ 
>Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>
>01:01.0 VGA compatible controller: ATI Technologies Inc Rage 
>XL (rev 27) (prog-if 00 [VGA])
>	Subsystem: Intel Corp.: Unknown device 3402
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- 
>VGASnoop- ParErr- Stepping+ SERR- FastB2B-
>	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64 (2000ns min), Cache Line Size 20
>	Region 0: Memory at 00000000fa000000 (32-bit, 
>non-prefetchable) [size=00000000fbfa0000]
>	Region 1: I/O ports at 6800 [size=256]
>	Region 2: Memory at 00000000fbfd0000 (32-bit, 
>non-prefetchable) [size=4K]
>	Expansion ROM at 0000000000020000 [disabled]
>	Capabilities: [5c] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
>PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>02:1c.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) 
>(prog-if 20 [IO(X)-APIC])
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- 
>VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Region 0: Memory at 00000000f3ff0000 (32-bit, non-prefetchable)
>	Capabilities: [50] PCI-X non-bridge device.
>		Command: DPERE- ERO- RBC=0 OST=0
>		Status: Bus=2 Dev=28 Func=0 64bit+ 133MHz+ SCD- 
>USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
>
>02:1d.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge 
>(rev 04) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- 
>VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64, Cache Line Size 20
>	Bus: primary=02, secondary=03, subordinate=05, sec-latency=64
>	I/O behind bridge: 00007000-00008fff
>	Memory behind bridge: f4000000-f8cfffff
>	Prefetchable memory behind bridge: 
>00000000e8000000-00000000f2e00000
>	Expansion ROM at 0000000000007000 [disabled] [size=8K]
>	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [50] PCI-X bridge device.
>		Secondary Status: 64bit+, 133MHz+, SCD-, USC-, 
>SCO-, SRD- Freq=0
>		Status: Bus=2 Dev=29 Func=0 64bit+ 133MHz+ SCD- 
>USC-, SCO-, SRD-
>		: Upstream: Capacity=65535, Commitment Limit=0
>		: Downstream: Capacity=65535, Commitment Limit=0
>
>02:1e.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) 
>(prog-if 20 [IO(X)-APIC])
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- 
>VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Region 0: Memory at 00000000f3fe0000 (32-bit, non-prefetchable)
>	Capabilities: [50] PCI-X non-bridge device.
>		Command: DPERE- ERO- RBC=0 OST=0
>		Status: Bus=2 Dev=30 Func=0 64bit+ 133MHz+ SCD- 
>USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
>
>02:1f.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge 
>(rev 04) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- 
>VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64, Cache Line Size 20
>	Bus: primary=02, secondary=06, subordinate=06, sec-latency=64
>	I/O behind bridge: 00009000-00009fff
>	Memory behind bridge: f8d00000-f8ffffff
>	Prefetchable memory behind bridge: 
>00000000f2f00000-00000000f2f00000
>	Expansion ROM at 0000000000009000 [disabled] [size=4K]
>	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [50] PCI-X bridge device.
>		Secondary Status: 64bit+, 133MHz+, SCD-, USC-, 
>SCO-, SRD- Freq=0
>		Status: Bus=2 Dev=31 Func=0 64bit+ 133MHz+ SCD- 
>USC-, SCO-, SRD-
>		: Upstream: Capacity=65535, Commitment Limit=0
>		: Downstream: Capacity=65535, Commitment Limit=0
>
>03:1f.0 PCI Hot-plug controller: Intel Corp. 82870P2 P64H2 Hot 
>Plug Controller (rev 04)
>	Subsystem: Intel Corp.: Unknown device 03b0
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- 
>VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 52
>	Region 0: Memory at 00000000f2ef0000 (64-bit, prefetchable)
>	Capabilities: [64] PCI-X non-bridge device.
>		Command: DPERE- ERO- RBC=0 OST=0
>		Status: Bus=3 Dev=31 Func=0 64bit+ 133MHz+ SCD- 
>USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
>
>06:01.0 Ethernet controller: Intel Corp. 82543GC Gigabit 
>Ethernet Controller (Copper) (rev 02)
>	Subsystem: Intel Corp. PRO/1000 T Server Adapter
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ 
>VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64 (63750ns min), Cache Line Size 20
>	Interrupt: pin A routed to IRQ 53
>	Region 0: Memory at 00000000f8fe0000 (32-bit, 
>non-prefetchable) [size=00000000f8fc0000]
>	Region 1: Memory at 00000000f8fd0000 (32-bit, 
>non-prefetchable) [size=64K]
>	Expansion ROM at 0000000000010000 [disabled]
>	Capabilities: [dc] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
>PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>06:02.0 SCSI storage controller: LSI Logic / Symbios Logic 
>53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07)
>	Subsystem: Intel Corp.: Unknown device 3402
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ 
>VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64 (4250ns min, 4500ns max), Cache Line Size 20
>	Interrupt: pin A routed to IRQ 54
>	Region 0: I/O ports at 9800 [size=00000000f8d00000]
>	Region 1: Memory at 00000000f8f90000 (64-bit, 
>non-prefetchable) [size=64K]
>	Region 3: Memory at 00000000f8f80000 (64-bit, 
>non-prefetchable) [size=64K]
>	Expansion ROM at 0000000000100000 [disabled]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
>PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Message Signalled Interrupts: 64bit+ 
>Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [68] PCI-X non-bridge device.
>		Command: DPERE- ERO- RBC=2 OST=0
>		Status: Bus=255 Dev=31 Func=0 64bit+ 133MHz+ 
>SCD- USC-, DC=simple, DMMRBC=2, DMOST=4, DMCRS=1, RSCEM-
>
>06:02.1 SCSI storage controller: LSI Logic / Symbios Logic 
>53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07)
>	Subsystem: Intel Corp.: Unknown device 3402
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ 
>VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64 (4250ns min, 4500ns max), Cache Line Size 20
>	Interrupt: pin B routed to IRQ 55
>	Region 0: I/O ports at 9c00 [size=00000000f8e00000]
>	Region 1: Memory at 00000000f8fb0000 (64-bit, 
>non-prefetchable) [size=64K]
>	Region 3: Memory at 00000000f8fa0000 (64-bit, 
>non-prefetchable) [size=64K]
>	Expansion ROM at 0000000000100000 [disabled]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
>PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Message Signalled Interrupts: 64bit+ 
>Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [68] PCI-X non-bridge device.
>		Command: DPERE- ERO- RBC=2 OST=0
>		Status: Bus=255 Dev=31 Func=1 64bit+ 133MHz+ 
>SCD- USC-, DC=simple, DMMRBC=2, DMOST=4, DMCRS=1, RSCEM-
>
>06:1f.0 PCI Hot-plug controller: Intel Corp. 82870P2 P64H2 Hot 
>Plug Controller (rev 04)
>	Subsystem: Intel Corp.: Unknown device 03b0
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- 
>VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 56
>	Region 0: Memory at 00000000f2ff0000 (64-bit, prefetchable)
>	Capabilities: [64] PCI-X non-bridge device.
>		Command: DPERE- ERO- RBC=0 OST=0
>		Status: Bus=6 Dev=31 Func=0 64bit+ 133MHz+ SCD- 
>USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
>
>08:1c.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) 
>(prog-if 20 [IO(X)-APIC])
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- 
>VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Region 0: Memory at 00000000e1ff0000 (32-bit, non-prefetchable)
>	Capabilities: [50] PCI-X non-bridge device.
>		Command: DPERE- ERO- RBC=0 OST=0
>		Status: Bus=8 Dev=28 Func=0 64bit+ 133MHz+ SCD- 
>USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
>
>08:1d.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge 
>(rev 04) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- 
>VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64, Cache Line Size 20
>	Bus: primary=08, secondary=09, subordinate=0a, sec-latency=64
>	I/O behind bridge: 0000a000-0000afff
>	Memory behind bridge: e2000000-e3ffffff
>	Prefetchable memory behind bridge: 
>00000000d3f00000-00000000d7f00000
>	Expansion ROM at 000000000000a000 [disabled] [size=4K]
>	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [50] PCI-X bridge device.
>		Secondary Status: 64bit+, 133MHz+, SCD-, USC-, 
>SCO-, SRD- Freq=0
>		Status: Bus=8 Dev=29 Func=0 64bit+ 133MHz+ SCD- 
>USC-, SCO-, SRD-
>		: Upstream: Capacity=65535, Commitment Limit=0
>		: Downstream: Capacity=65535, Commitment Limit=0
>
>08:1e.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) 
>(prog-if 20 [IO(X)-APIC])
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- 
>VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Region 0: Memory at 00000000e1fe0000 (32-bit, non-prefetchable)
>	Capabilities: [50] PCI-X non-bridge device.
>		Command: DPERE- ERO- RBC=0 OST=0
>		Status: Bus=8 Dev=30 Func=0 64bit+ 133MHz+ SCD- 
>USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
>
>08:1f.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge 
>(rev 04) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- 
>VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64, Cache Line Size 20
>	Bus: primary=08, secondary=0b, subordinate=0d, sec-latency=64
>	I/O behind bridge: 0000b000-0000cfff
>	Memory behind bridge: e4000000-e7ffffff
>	Prefetchable memory behind bridge: 
>00000000d8000000-00000000e0f00000
>	Expansion ROM at 000000000000b000 [disabled] [size=8K]
>	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [50] PCI-X bridge device.
>		Secondary Status: 64bit+, 133MHz+, SCD-, USC-, 
>SCO-, SRD- Freq=0
>		Status: Bus=8 Dev=31 Func=0 64bit+ 133MHz+ SCD- 
>USC-, SCO-, SRD-
>		: Upstream: Capacity=65535, Commitment Limit=0
>		: Downstream: Capacity=65535, Commitment Limit=0
>
>09:1f.0 PCI Hot-plug controller: Intel Corp. 82870P2 P64H2 Hot 
>Plug Controller (rev 04)
>	Subsystem: Intel Corp.: Unknown device 03f0
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- 
>VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 57
>	Region 0: Memory at 00000000d3ff0000 (64-bit, prefetchable)
>	Capabilities: [64] PCI-X non-bridge device.
>		Command: DPERE- ERO- RBC=0 OST=0
>		Status: Bus=9 Dev=31 Func=0 64bit+ 133MHz+ SCD- 
>USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
>
>0b:1f.0 PCI Hot-plug controller: Intel Corp. 82870P2 P64H2 Hot 
>Plug Controller (rev 04)
>	Subsystem: Intel Corp.: Unknown device 03b0
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- 
>VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 58
>	Region 0: Memory at 00000000e0ff0000 (64-bit, prefetchable)
>	Capabilities: [64] PCI-X non-bridge device.
>		Command: DPERE- ERO- RBC=0 OST=0
>		Status: Bus=11 Dev=31 Func=0 64bit+ 133MHz+ 
>SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
>
>0e:1c.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) 
>(prog-if 20 [IO(X)-APIC])
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- 
>VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Region 0: Memory at 00000000cdff0000 (32-bit, non-prefetchable)
>	Capabilities: [50] PCI-X non-bridge device.
>		Command: DPERE- ERO- RBC=0 OST=0
>		Status: Bus=14 Dev=28 Func=0 64bit+ 133MHz+ 
>SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
>
>0e:1d.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge 
>(rev 04) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- 
>VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64, Cache Line Size 20
>	Bus: primary=0e, secondary=0f, subordinate=10, sec-latency=64
>	I/O behind bridge: 0000d000-0000dfff
>	Memory behind bridge: ce000000-cfffffff
>	Prefetchable memory behind bridge: 
>00000000c3f00000-00000000c7f00000
>	Expansion ROM at 000000000000d000 [disabled] [size=4K]
>	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [50] PCI-X bridge device.
>		Secondary Status: 64bit+, 133MHz+, SCD-, USC-, 
>SCO-, SRD- Freq=0
>		Status: Bus=14 Dev=29 Func=0 64bit+ 133MHz+ 
>SCD- USC-, SCO-, SRD-
>		: Upstream: Capacity=65535, Commitment Limit=0
>		: Downstream: Capacity=65535, Commitment Limit=0
>
>0e:1e.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) 
>(prog-if 20 [IO(X)-APIC])
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- 
>VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Region 0: Memory at 00000000cdfe0000 (32-bit, non-prefetchable)
>	Capabilities: [50] PCI-X non-bridge device.
>		Command: DPERE- ERO- RBC=0 OST=0
>		Status: Bus=14 Dev=30 Func=0 64bit+ 133MHz+ 
>SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
>
>0e:1f.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge 
>(rev 04) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- 
>VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64, Cache Line Size 20
>	Bus: primary=0e, secondary=11, subordinate=12, sec-latency=64
>	I/O behind bridge: 0000e000-0000efff
>	Memory behind bridge: d0000000-d2ffffff
>	Prefetchable memory behind bridge: 
>00000000c8000000-00000000ccf00000
>	Expansion ROM at 000000000000e000 [disabled] [size=4K]
>	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [50] PCI-X bridge device.
>		Secondary Status: 64bit+, 133MHz+, SCD-, USC-, 
>SCO-, SRD- Freq=0
>		Status: Bus=14 Dev=31 Func=0 64bit+ 133MHz+ 
>SCD- USC-, SCO-, SRD-
>		: Upstream: Capacity=65535, Commitment Limit=0
>		: Downstream: Capacity=65535, Commitment Limit=0
>
>0f:1f.0 PCI Hot-plug controller: Intel Corp. 82870P2 P64H2 Hot 
>Plug Controller (rev 04)
>	Subsystem: Intel Corp.: Unknown device 03f0
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- 
>VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 59
>	Region 0: Memory at 00000000c3ff0000 (64-bit, prefetchable)
>	Capabilities: [64] PCI-X non-bridge device.
>		Command: DPERE- ERO- RBC=0 OST=0
>		Status: Bus=15 Dev=31 Func=0 64bit+ 133MHz+ 
>SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
>
>11:1f.0 PCI Hot-plug controller: Intel Corp. 82870P2 P64H2 Hot 
>Plug Controller (rev 04)
>	Subsystem: Intel Corp.: Unknown device 03f0
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- 
>VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 60
>	Region 0: Memory at 00000000ccff0000 (64-bit, prefetchable)
>	Capabilities: [64] PCI-X non-bridge device.
>		Command: DPERE- ERO- RBC=0 OST=0
>		Status: Bus=17 Dev=31 Func=0 64bit+ 133MHz+ 
>SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
>
>ff:18.0 Host bridge: Intel Corp. E8870 Processor bus control (rev 20)
>	Subsystem: Intel Corp.: Unknown device 8086
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- 
>VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>ff:18.1 Host bridge: Intel Corp. E8870 Memory controller (rev 20)
>	Subsystem: Intel Corp.: Unknown device 8086
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- 
>VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>ff:18.2 Host bridge: Intel Corp. E8870 Scalability Port 0 (rev 20)
>	Subsystem: Intel Corp.: Unknown device 8086
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- 
>VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>ff:18.3 Host bridge: Intel Corp. E8870 Scalability Port 1 (rev 20)
>	Subsystem: Intel Corp.: Unknown device 8086
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- 
>VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>ff:1c.0 Host bridge: Intel Corp. E8870IO Hub Interface Port 0 
>registers (8-bit compatibility port) (rev 22)
>	Subsystem: Intel Corp.: Unknown device 8086
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- 
>VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast 
>>TAbort- <TAbort- <MAbort+ >SERR- <PERR-
>	Latency: 0
>
>ff:1c.1 Host bridge: Intel Corp. E8870IO Hub Interface Port 1 
>registers (rev 22)
>	Subsystem: Intel Corp.: Unknown device 8086
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- 
>VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast 
>>TAbort- <TAbort- <MAbort+ >SERR- <PERR-
>	Latency: 0
>
>ff:1c.2 Host bridge: Intel Corp. E8870IO Hub Interface Port 2 
>registers (rev 22)
>	Subsystem: Intel Corp.: Unknown device 8086
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- 
>VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>
>ff:1c.3 Host bridge: Intel Corp. E8870IO Hub Interface Port 3 
>registers (rev 22)
>	Subsystem: Intel Corp.: Unknown device 8086
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- 
>VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast 
>>TAbort- <TAbort- <MAbort+ >SERR- <PERR-
>	Latency: 0
>
>ff:1c.4 Host bridge: Intel Corp. E8870IO Hub Interface Port 4 
>registers (rev 22)
>	Subsystem: Intel Corp.: Unknown device 8086
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- 
>VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast 
>>TAbort- <TAbort- <MAbort+ >SERR- <PERR-
>	Latency: 0
>
>ff:1c.5 Host bridge: Intel Corp. E8870IO General SIOH 
>registers (rev 22)
>	Subsystem: Intel Corp.: Unknown device 8086
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- 
>VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>ff:1c.6 Host bridge: Intel Corp. E8870IO RAS registers (rev 22)
>	Subsystem: Intel Corp.: Unknown device 8086
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- 
>VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast 
>>TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
-
To unsubscribe from this list: send the line "unsubscribe linux-ia64" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Received on Tue Sep 14 22:17:50 2004

This archive was generated by hypermail 2.1.8 : 2005-08-02 09:20:30 EST