ACPI Test Report for 2.6 ia64 kernel ========================= Hardware Configuration: ----------------------- System Name: ACPI-Tiger System Type: 4 way 900 Itanium2, tiger M/B revision: N/A Processor version: N/A Firmware Versions: N/A I/O configuration summary: MPT scsi host driver Seagate ST318406LC boot drive IDE floppy and CDROM Serial console USB mouse USB keyboard Ethernet Pro 1000 Software Configuration: 1. bk pull from http://lia64.bkbits.net:8080/linux-ia64-2.5 2. bk pull from http://linux-acpi.bkbits.net:8080/linux-acpi-test-2.6.6 ACPI Features Tested: (prioritized). -------------------- 1. Boot tested ok 2. serial console tested ok 3. ATI (run X window system) blank screen. 4. usb keyboard tested ok 5. USB mouse tested ok 6. NIC (eg. Ping or ftp) tested ok 7. IDE (eg. r/w floppy or CDROM) tested ok 8. SCI (eg. Press power button) tested ok 9. Soft Power off tested ok 10. cat /proc/acpi/event with power button tested ok l of 4 processors activated (8359.04 BogoMIPS). NET: Registered protocol family 16 ACPI: Subsystem revision 20040326 tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:................................................................ ........................................................................ .......................... Table [DSDT](id F004) - 1385 Objects with 110 Devices 162 Methods 40 Regions ACPI Namespace successfully loaded at root a000000100a95b08 evxfevnt-0082 [04] acpi_enable : System is already in ACPI mode evgpeblk-0867 [06] ev_create_gpe_block : GPE 00 to 31 [_GPE] 4 regs at 0000000000000C28 on int 9 evgpeblk-0925 [06] ev_create_gpe_block : Found 0 Wake, Enabled 7 Runtime GPEs in this block Completing Region/Field/Buffer/Package initialization:......................................................... ............... Initialized 40/40 Regions 1/1 Fields 16/16 Buffers 15/15 Packages (1394 nodes) Executing all Device _STA and_INI methods:................................................................ ........................................ 104 Devices found containing: 104 _STA, 3 _INI methods ACPI: Interpreter enabled ACPI: Using IOSAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.H2PB._PRT] ACPI: PCI Root Bridge [PCI1] (00:02) ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.P2PA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.P2PB._PRT] ACPI: PCI Root Bridge [PCI3] (00:09) ACPI: PCI Interrupt Routing Table [\_SB_.PCI3.P2PA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI3.P2PB._PRT] ACPI: PCI Root Bridge [PCI4] (00:0f) ACPI: PCI Interrupt Routing Table [\_SB_.PCI4.P2PA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI4.P2PB._PRT] SCSI subsystem initialized usbcore: registered new driver hub IOSAPIC: vector 50 -> CPU 0xc218, enabled IOSAPIC: vector 49 -> CPU 0xc218, enabled IOSAPIC: vector 48 -> CPU 0xc218, enabled pci_irq-0316 [03] acpi_pci_irq_derive : Unable to derive IRQ for device 0000:00:1f.1 ACPI: No IRQ known for interrupt pin A of device 0000:00:1f.1 IOSAPIC: vector 51 -> CPU 0xc218, enabled IOSAPIC: vector 67 -> CPU 0xc218, enabled IOSAPIC: vector 56 -> CPU 0xc218, enabled IOSAPIC: vector 57 -> CPU 0xc218, enabled IOSAPIC: vector 58 -> CPU 0xc218, enabled IOSAPIC: vector 80 -> CPU 0xc218, enabled IOSAPIC: vector 75 -> CPU 0xc218, enabled IOSAPIC: vector 90 -> CPU 0xc218, enabled IOSAPIC: vector 81 -> CPU 0xc218, enabled IOSAPIC: vector 85 -> CPU 0xc218, enabled PCI: Using ACPI for IRQ routing perfmon: version 2.0 IRQ 238 perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits) EFI Variables Facility v0.06 2002-Dec-10 PAL Information Facility v0.5 perfmon: added sampling format default_format perfmon_default_smpl: default_format v2.0 registered Total HugeTLB memory allocated, 0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). udf: registering filesystem Initializing Cryptographic API ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU0] (supports C1) ACPI: Processor [CPU1] (supports C1) ACPI: Processor [CPU2] (supports C1) ACPI: Processor [CPU3] (supports C1) EFI Time Services Driver v0.4 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled acpi_serial_port: zero-length IO port range? ttyS0 at I/O 0x3f8 (irq = 44) is a 16550A acpi_serial_port: zero-length IO port range? ttyS1 at I/O 0x2f8 (irq = 45) is a 16550A RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 5.2.39-k2 Copyright (c) 1999-2004 Intel Corporation. IOSAPIC: vector 51 -> CPU 0xc218, enabled eth0: Intel(R) PRO/1000 Network Connection IOSAPIC: vector 81 -> CPU 0xc218, enabled eth1: Intel(R) PRO/1000 Network Connection Ethernet Channel Bonding Driver: v2.6.0 (January 14, 2004) bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx hda: MATSHITADVD-ROM SR-8177, ATAPI CD/DVD-ROM drive hdb: LS-120/240 00 UHD Floppy, ATAPI FLOPPY drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 34 hda: ATAPI 24X DVD-ROM drive, 256kB Cache Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide hdb: No disk in drive hdb: 234752kB, 262/32/56 CHS, 2995 kBps, 512 sector size, 1500 rpm st: Version 20040318, fixed bufsize 32768, s/g segs 256 osst :I: Tape driver with OnStream support version 0.99.1 osst :I: $Id: osst.c,v 1.70 2003/12/23 14:22:12 wriede Exp $ Fusion MPT base driver 3.01.03 Copyright (c) 1999-2004 LSI Logic Corporation IOSAPIC: vector 56 -> CPU 0xc218, enabled mptbase: Initiating ioc0 bringup ioc0: 53C1030: Capabilities={Initiator} IOSAPIC: vector 57 -> CPU 0xc218, enabled mptbase: Initiating ioc1 bringup ioc1: 53C1030: Capabilities={Initiator} Fusion MPT SCSI Host driver 3.01.03 scsi0 : ioc0: LSI53C1030, FwRev=01030600h, Ports=1, MaxQ=255, IRQ=56 Vendor: SEAGATE Model: ST318406LC Rev: 8A03 Type: Direct-Access ANSI SCSI revision: 03 SCSI device sda: 35566478 512-byte hdwr sectors (18210 MB) SCSI device sda: drive cache: write through sda: sda1 sda2 sda3 Attached scsi disk sda at scsi0, channel 0, id 1, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 1, lun 0, type 0 Vendor: ESG-SHV Model: SCA HSBP M17 Rev: 0101 Type: Processor ANSI SCSI revision: 02 Attached scsi generic sg1 at scsi0, channel 0, id 6, lun 0, type 3 scsi1 : ioc1: LSI53C1030, FwRev=01030600h, Ports=1, MaxQ=255, IRQ=57 ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 IOSAPIC: vector 48 -> CPU 0xc218, enabled ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB USB2 ehci_hcd 0000:00:1d.7: reset hcs_params 0x102204 dbg=1 cc=2 pcc=2 ordered !ppc ports=4 ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr ehci_hcd 0000:00:1d.7: capability 0001 at 68 ehci_hcd 0000:00:1d.7: irq 48, pci mem c0000000f9ff0000 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT PCI: slot 0000:00:1d.7 has incorrect PCI cache line size of 0 bytes, correcting to 128 ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29 ehci_hcd 0000:00:1d.7: root hub device address 1 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: default language 0x0409 usb usb1: Product: Intel Corp. 82801DB USB2 usb usb1: Manufacturer: Linux 2.6.6-rc2 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 usb usb1: hotplug usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: hotplug hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: ganged power switching hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: Single TT hub 1-0:1.0: TT requires at most 8 FS bit times hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: hub controller current requirement: 0mA hub 1-0:1.0: local power source is good hub 1-0:1.0: enabling power on all ports ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 80 td 96 USB Universal Host Controller Interface driver v2.2 IOSAPIC: vector 50 -> CPU 0xc218, enabled uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB USB (Hub #1) uhci_hcd 0000:00:1d.0: irq 50, io base 0000000000004cc0 ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 3, status 501, change 1, 480 Mb/s uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: detected 2 ports hub 1-0:1.0: debounce: port 3: delay 100ms stable 4 status 0x501 uhci_hcd 0000:00:1d.0: root hub device address 1 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: default language 0x0409 usb usb2: Product: Intel Corp. 82801DB USB (Hub #1) ehci_hcd 0000:00:1d.7: port 3 full speed --> companion ehci_hcd 0000:00:1d.7: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT usb usb2: Manufacturer: Linux 2.6.6-rc2 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: hotplug usb usb2: adding 2-0:1.0 (config #1, interface 0) usb 2-0:1.0: hotplug hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: individual port over-current protection hub 2-0:1.0: power on to power good time: 2ms hub 2-0:1.0: hub controller current requirement: 0mA hub 2-0:1.0: local power source is good hub 2-0:1.0: enabling power on all ports IOSAPIC: vector 49 -> CPU 0xc218, enabled uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB USB (Hub #2) uhci_hcd 0000:00:1d.1: irq 49, io base 0000000000004ce0 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: detected 2 ports uhci_hcd 0000:00:1d.1: root hub device address 1 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: default language 0x0409 usb usb3: Product: Intel Corp. 82801DB USB (Hub #2) usb usb3: Manufacturer: Linux 2.6.6-rc2 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 usb usb3: hotplug usb usb3: adding 3-0:1.0 (config #1, interface 0) usb 3-0:1.0: hotplug hub 3-0:1.0: usb_probe_interface hub 3-0:1.0: usb_probe_interface - got id hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected hub 3-0:1.0: standalone hub hub 3-0:1.0: no power switching (usb 1.0) hub 3-0:1.0: individual port over-current protection hub 3-0:1.0: power on to power good time: 2ms hub 3-0:1.0: hub controller current requirement: 0mA hub 3-0:1.0: local power source is good hub 3-0:1.0: enabling power on all ports usbcore: registered new driver hiddev usbcore: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 36 uhci_hcd 0000:00:1d.1: port 1 portsc 0093 hub 3-0:1.0: port 1, status 101, change 1, 12 Mb/s atkbd.c: keyboard reset failed on isa0060/serio1 hub 3-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x101 usb 3-1: new full speed USB device using address 2 usb 3-1: new device strings: Mfr=0, Product=1, SerialNumber=0 usb 3-1: default language 0x0409 usb 3-1: Product: USB Hub usb 3-1: hotplug usb 3-1: adding 3-1:1.0 (config #1, interface 0) usb 3-1:1.0: hotplug hub 3-1:1.0: usb_probe_interface hub 3-1:1.0: usb_probe_interface - got id hub 3-1:1.0: USB hub found serio: i8042 KBD port at 0x60,0x64 irq 32 hub 3-1:1.0: 7 ports detected hub 3-1:1.0: standalone hub hub 3-1:1.0: individual port power switching hub 3-1:1.0: individual port over-current protection hub 3-1:1.0: power on to power good time: 100ms hub 3-1:1.0: hub controller current requirement: 100mA atkbd.c: keyboard reset failed on isa0060/serio0 hub 3-1:1.0: local power source is good hub 3-1:1.0: enabling power on all ports hub 3-1:1.0: port 1, status 301, change 1, 1.5 Mb/s hub 3-1:1.0: debounce: port 1: delay 100ms stable 4 status 0x301 NET: Registered protocol family 2 IP: routing cache hash table of 16384 buckets, 256Kbytes TCP: Hash tables configured (established 131072 bind 65536) usb 3-1.1: new low speed USB device using address 3 usb 3-1.1: skipped 1 class/vendor specific interface descriptors usb 3-1.1: skipped 1 class/vendor specific interface descriptors usb 3-1.1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1.1: default language 0x0409 usb 3-1.1: Product: USB Composite Keyboard usb 3-1.1: Manufacturer: SOLIDTEK usb 3-1.1: hotplug usb 3-1.1: adding 3-1.1:1.0 (config #1, interface 0) usb 3-1.1:1.0: hotplug hid 3-1.1:1.0: usb_probe_interface hid 3-1.1:1.0: usb_probe_interface - got id input: USB HID v1.10 Keyboard [SOLIDTEK USB Composite Keyboard] on usb-0000:00:1d.1-1.1 usb 3-1.1: adding 3-1.1:1.1 (config #1, interface 1) usb 3-1.1:1.1: hotplug hid 3-1.1:1.1: usb_probe_interface hid 3-1.1:1.1: usb_probe_interface - got id drivers/usb/input/hid-core.c: ctrl urb status -32 received drivers/usb/input/hid-core.c: ctrl urb status -32 received drivers/usb/input/hid-core.c: ctrl urb status -32 received drivers/usb/core/file.c: looking for a minor, starting at 96 input,hiddev96: USB HID v1.10 Device [SOLIDTEK USB Composite Keyboard] on usb-0000:00:1d.1-1.1 hub 3-1:1.0: port 3, status 301, change 1, 1.5 Mb/s hub 3-1:1.0: debounce: port 3: delay 100ms stable 4 status 0x301 uhci_hcd 0000:00:1d.0: suspend_hc usb 3-1.3: new low speed USB device using address 4 usb 3-1.3: skipped 1 class/vendor specific interface descriptors usb 3-1.3: new device strings: Mfr=1, Product=3, SerialNumber=0 usb 3-1.3: default language 0x0409 usb 3-1.3: Product: Microsoft 5-Button Mouse with IntelliEye(TM) usb 3-1.3: Manufacturer: Microsoft usb 3-1.3: hotplug usb 3-1.3: adding 3-1.3:1.0 (config #1, interface 0) usb 3-1.3:1.0: hotplug hid 3-1.3:1.0: usb_probe_interface hid 3-1.3:1.0: usb_probe_interface - got id input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-1.3 hub 3-1:1.0: port 4, status 301, change 1, 1.5 Mb/s hub 3-1:1.0: debounce: port 4: delay 100ms stable 4 status 0x301 arp_tables: (C) 2002 David S. Miller NET: Registered protocol family 1 NET: Registered protocol family 17 EXT3-fs: INFO: recovery required on readonly filesystem. usb 3-1.4: new low speed USB device using address 5 usb 3-1.4: skipped 1 class/vendor specific interface descriptors usb 3-1.4: skipped 1 class/vendor specific interface descriptors usb 3-1.4: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1.4: default language 0x0409 usb 3-1.4: Product: Generic KVM104UC usb 3-1.4: Manufacturer: Tangtop usb 3-1.4: hotplug usb 3-1.4: adding 3-1.4:1.0 (config #1, interface 0) usb 3-1.4:1.0: hotplug hid 3-1.4:1.0: usb_probe_interface hid 3-1.4:1.0: usb_probe_interface - got id input: USB HID v1.00 Keyboard [Tangtop Generic KVM104UC] on usb-0000:00:1d.1-1.4 usb 3-1.4: adding 3-1.4:1.1 (config #1, interface 1) usb 3-1.4:1.1: hotplug hid 3-1.4:1.1: usb_probe_interface hid 3-1.4:1.1: usb_probe_interface - got id input: USB HID v1.00 Mouse [Tangtop Generic KVM104UC] on usb-0000:00:1d.1-1.4 EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 240kB freed EXT3 FS on sda2, internal journal Adding 2024144k swap on /dev/sda3. Priority:-1 extents:1 partx(454): unaligned access to 0x600000000000ca16, ip=0x4000000000002ce1 partx(454): unaligned access to 0x600000000000ca1a, ip=0x4000000000002d01 partx(454): unaligned access to 0x600000000000ca26, ip=0x4000000000002ce1 partx(454): unaligned access to 0x600000000000ca2a, ip=0x4000000000002d01 e1000: eth0 NIC Link is Up 100 Mbps Full Duplex ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A CPU0 CPU1 CPU2 CPU3 29: 0 0 0 0 LSAPIC cmc_poll 30: 0 0 0 0 IO-SAPIC-level cpe_hndlr 31: 0 0 0 0 LSAPIC cmc_hndlr 34: 1 0 111 0 IO-SAPIC-edge ide0 39: 0 0 3 0 IO-SAPIC-level acpi 48: 0 0 0 0 IO-SAPIC-level ehci_hcd 49: 0 0 694 0 IO-SAPIC-level uhci_hcd 50: 0 0 0 0 IO-SAPIC-level uhci_hcd 51: 2 24 1295 20 IO-SAPIC-level eth0 56: 29 2 3641 1 IO-SAPIC-level ioc0 57: 0 0 44 0 IO-SAPIC-level ioc1 232: 0 0 0 0 LSAPIC mca_rdzv 238: 0 0 0 0 LSAPIC perfmon 239: 359775 355417 355169 354952 LSAPIC timer 240: 0 0 0 0 LSAPIC mca_wkup 254: 15 76 80 72 LSAPIC IPI NMI: 0 0 0 0 ERR: 0 00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 02) (prog-if 00 [UHCI]) Subsystem: Intel Corp.: Unknown device 3402 Flags: bus master, medium devsel, latency 0, IRQ 50 I/O ports at 4cc0 [size=32] 00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 02) (prog-if 00 [UHCI]) Subsystem: Intel Corp.: Unknown device 3402 Flags: bus master, medium devsel, latency 0, IRQ 49 I/O ports at 4ce0 [size=32] 00:1d.7 USB Controller: Intel Corp. 82801DB USB2 (rev 02) (prog-if 20 [EHCI]) Subsystem: Intel Corp.: Unknown device 3402 Flags: bus master, medium devsel, latency 0, IRQ 48 Memory at 00000000f9ff0000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] #0a [2080] 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev 82) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00005000-00005fff Memory behind bridge: fa000000-fbffffff 00:1f.0 ISA bridge: Intel Corp. 82801DB LPC Interface Controller (rev 02) Flags: bus master, medium devsel, latency 0 00:1f.1 IDE interface: Intel Corp. 82801DB Ultra ATA Storage Controller (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Intel Corp.: Unknown device 3402 Flags: bus master, medium devsel, latency 0 I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at 1000 [size=16] Memory at <unassigned> (32-bit, non-prefetchable) [disabled] [size=1K] 01:00.0 Ethernet controller: Intel Corp. 82540EM Gigabit Ethernet Controller (rev 02) Subsystem: Intel Corp.: Unknown device 3402 Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 51 Memory at 00000000fbfe0000 (32-bit, non-prefetchable) [size=128K] I/O ports at 5cc0 [size=64] Capabilities: [dc] Power Management version 2 Capabilities: [e4] PCI-X non-bridge device. Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- 01:01.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA]) Subsystem: Intel Corp.: Unknown device 3402 Flags: bus master, stepping, medium devsel, latency 64 Memory at 00000000fa000000 (32-bit, non-prefetchable) [size=16M] I/O ports at 5800 [size=256] Memory at 00000000fbfd0000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at 00000000fbfa0000 [disabled] [size=128K] Capabilities: [5c] Power Management version 2 02:1c.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) (prog-if 20 [IO(X)-APIC]) Flags: bus master, 66Mhz, fast devsel, latency 0 Memory at 00000000f1ff0000 (32-bit, non-prefetchable) [size=4K] Capabilities: [50] PCI-X non-bridge device. 02:1d.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, fast devsel, latency 64 Bus: primary=02, secondary=03, subordinate=05, sec-latency=64 I/O behind bridge: 00006000-00007fff Memory behind bridge: f2000000-f5ffffff Prefetchable memory behind bridge: 00000000e3f00000-00000000ebf00000 Capabilities: [50] PCI-X non-bridge device. 02:1e.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) (prog-if 20 [IO(X)-APIC]) Flags: bus master, 66Mhz, fast devsel, latency 0 Memory at 00000000f1fe0000 (32-bit, non-prefetchable) [size=4K] Capabilities: [50] PCI-X non-bridge device. 02:1f.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, fast devsel, latency 64 Bus: primary=02, secondary=06, subordinate=07, sec-latency=64 I/O behind bridge: 00008000-00009fff Memory behind bridge: f6000000-f8ffffff Prefetchable memory behind bridge: 00000000ec000000-00000000f0f00000 Capabilities: [50] PCI-X non-bridge device. 03:1f.0 PCI Hot-plug controller: Intel Corp. 82870P2 P64H2 Hot Plug Controller (rev 04) Subsystem: Intel Corp.: Unknown device 03b0 Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 67 Memory at 00000000e3ff0000 (64-bit, prefetchable) [size=256] Capabilities: [64] PCI-X non-bridge device. 06:02.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07) Subsystem: Intel Corp.: Unknown device 3402 Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 56 I/O ports at 8800 [size=256] Memory at 00000000f8fd0000 (64-bit, non-prefetchable) [size=64K] Memory at 00000000f8fc0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at 00000000f8d00000 [disabled] [size=1M] Capabilities: [50] Power Management version 2 Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [68] PCI-X non-bridge device. 06:02.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07) Subsystem: Intel Corp.: Unknown device 3402 Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 57 I/O ports at 8c00 [size=256] Memory at 00000000f8ff0000 (64-bit, non-prefetchable) [size=64K] Memory at 00000000f8fe0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at 00000000f8e00000 [disabled] [size=1M] Capabilities: [50] Power Management version 2 Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Capabilities: [68] PCI-X non-bridge device. 06:1f.0 PCI Hot-plug controller: Intel Corp. 82870P2 P64H2 Hot Plug Controller (rev 04) Subsystem: Intel Corp.: Unknown device 03b0 Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 58 Memory at 00000000f0ff0000 (64-bit, prefetchable) [size=256] Capabilities: [64] PCI-X non-bridge device. 09:1c.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) (prog-if 20 [IO(X)-APIC]) Flags: bus master, 66Mhz, fast devsel, latency 0 Memory at 00000000dbff0000 (32-bit, non-prefetchable) [size=4K] Capabilities: [50] PCI-X non-bridge device. 09:1d.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, fast devsel, latency 64 Bus: primary=09, secondary=0a, subordinate=0b, sec-latency=64 I/O behind bridge: 0000a000-0000afff Memory behind bridge: dc000000-ddffffff Prefetchable memory behind bridge: 00000000cbf00000-00000000cff00000 Capabilities: [50] PCI-X non-bridge device. 09:1e.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) (prog-if 20 [IO(X)-APIC]) Flags: bus master, 66Mhz, fast devsel, latency 0 Memory at 00000000dbfe0000 (32-bit, non-prefetchable) [size=4K] Capabilities: [50] PCI-X non-bridge device. 09:1f.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, fast devsel, latency 64 Bus: primary=09, secondary=0c, subordinate=0e, sec-latency=64 I/O behind bridge: 0000b000-0000cfff Memory behind bridge: de000000-e2ffffff Prefetchable memory behind bridge: 00000000d0000000-00000000daf00000 Capabilities: [50] PCI-X non-bridge device. 0a:1f.0 PCI Hot-plug controller: Intel Corp. 82870P2 P64H2 Hot Plug Controller (rev 04) Subsystem: Intel Corp.: Unknown device 03f0 Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 80 Memory at 00000000cbff0000 (64-bit, prefetchable) [size=256] Capabilities: [64] PCI-X non-bridge device. 0c:1f.0 PCI Hot-plug controller: Intel Corp. 82870P2 P64H2 Hot Plug Controller (rev 04) Subsystem: Intel Corp.: Unknown device 03b0 Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 75 Memory at 00000000daff0000 (64-bit, prefetchable) [size=256] Capabilities: [64] PCI-X non-bridge device. 0f:1c.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) (prog-if 20 [IO(X)-APIC]) Flags: bus master, 66Mhz, fast devsel, latency 0 Memory at 00000000c7ff0000 (32-bit, non-prefetchable) [size=4K] Capabilities: [50] PCI-X non-bridge device. 0f:1d.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, fast devsel, latency 64 Bus: primary=0f, secondary=10, subordinate=11, sec-latency=64 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: c8000000-caefffff Prefetchable memory behind bridge: 00000000c0000000-00000000c6e00000 Capabilities: [50] PCI-X non-bridge device. 0f:1e.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) (prog-if 20 [IO(X)-APIC]) Flags: bus master, 66Mhz, fast devsel, latency 0 Memory at 00000000c7fe0000 (32-bit, non-prefetchable) [size=4K] Capabilities: [50] PCI-X non-bridge device. 0f:1f.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04) (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, fast devsel, latency 64 Bus: primary=0f, secondary=12, subordinate=12, sec-latency=64 I/O behind bridge: 0000e000-0000efff Memory behind bridge: caf00000-caffffff Prefetchable memory behind bridge: 00000000c6f00000-00000000c6f00000 Capabilities: [50] PCI-X non-bridge device. 10:1f.0 PCI Hot-plug controller: Intel Corp. 82870P2 P64H2 Hot Plug Controller (rev 04) Subsystem: Intel Corp.: Unknown device 03f0 Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 90 Memory at 00000000c6ef0000 (64-bit, prefetchable) [size=256] Capabilities: [64] PCI-X non-bridge device. 12:01.0 Ethernet controller: Intel Corp. 82545EM Gigabit Ethernet Controller (Copper) (rev 01) Subsystem: Intel Corp. PRO/1000 MT Server Adapter Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 81 Memory at 00000000cafe0000 (64-bit, non-prefetchable) [size=128K] I/O ports at ecc0 [size=64] Capabilities: [dc] Power Management version 2 Capabilities: [e4] PCI-X non-bridge device. Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- 12:1f.0 PCI Hot-plug controller: Intel Corp. 82870P2 P64H2 Hot Plug Controller (rev 04) Subsystem: Intel Corp.: Unknown device 03f0 Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 85 Memory at 00000000c6ff0000 (64-bit, prefetchable) [size=256] Capabilities: [64] PCI-X non-bridge device. - To unsubscribe from this list: send the line "unsubscribe linux-ia64" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.htmlReceived on Wed Apr 28 08:56:19 2004
This archive was generated by hypermail 2.1.8 : 2005-08-02 09:20:25 EST