Re: oops in serial_out in 2.6.5

From: Martin Pool <mbp_at_sourcefrog.net>
Date: 2004-04-14 09:55:45
On 13 Apr 2004, Alex Williamson <alex.williamson@hp.com> wrote:
> 
>    What's in your /var/lib/setserial/autoserial.conf?  What does the
> kernel print out for serial ports on bootup?  I'm guessing they're out
> of sync.  It would be nice if we could stop the oops, but I'm guessing
> the quicker fix is to reconfigure setserial to "kernel" configuration. 
> Your ttyS0 on irq 49 is likely the builtin UART, not the MP UART.  If
> that fixes it, please report back the differences in config versus
> kernel serial port listings.  Thanks,

Autoserial.conf has

###PORT STATE GENERATED USING AUTOSAVE-ONCE###
###AUTOSAVE-ONCE###
###AUTOSAVE-ONCE###
###AUTOSAVE###
#
# If you want to configure this file by hand, use
# dpkg --configure setserial
# and change the configuration mode of the file to MANUAL. If you do not do this# this file may be overwritten automatically the next time you upgrade the
# package.
#
/dev/ttyS0 uart 16550A port 0x0000 irq 59 baud_base 115200 spd_normal skip_test
auto_irq
/dev/ttyS1 uart 16550A port 0x0000 irq 60 baud_base 115200 spd_normal skip_test
auto_irq
/dev/ttyS2 uart 16550A port 0x0000 irq 57 baud_base 115200 spd_normal skip_test
/dev/ttyS3 uart 16550A port 0x0000 irq 57 baud_base 115200 spd_normal skip_test
/dev/ttyS4 uart 16550A port 0x0000 irq 57 baud_base 115200 spd_normal skip_test
/dev/ttyS5 uart 16550A port 0x0000 irq 57 baud_base 115200 spd_normal skip_test

The kernel reported 

Apr 13 16:18:25 kate kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Apr 13 16:18:25 kate kernel: ttyS0 at MMIO 0xf4050000 (irq = 49) is a 16550A
Apr 13 16:18:25 kate kernel: GSI 0x22(high,edge) -> CPU 0x0000 vector 75
Apr 13 16:18:25 kate kernel: ttyS1 at MMIO 0xff5e0000 (irq = 75) is a 16550A
Apr 13 16:18:25 kate kernel: GSI 0x23(high,edge) -> CPU 0x0000 vector 76
Apr 13 16:18:25 kate kernel: ttyS2 at MMIO 0xff5e2000 (irq = 76) is a 16550A
Apr 13 16:18:25 kate kernel: PCI: Found IRQ 49 for device 0000:e0:01.0
Apr 13 16:18:25 kate kernel: IOSAPIC: vector 49 -> CPU 0x0100, enabled
Apr 13 16:18:25 kate kernel: ttyS3 at MMIO 0xf4051000 (irq = 49) is a 16450
Apr 13 16:18:25 kate kernel: PCI: Found IRQ 49 for device 0000:e0:01.1
Apr 13 16:18:25 kate kernel: IOSAPIC: vector 49 -> CPU 0x0000, enabled
Apr 13 16:18:25 kate kernel: Couldn't register serial port 0000:e0:01.1: -28


I got my machine working again by just removing setserial.  Does it
ever do anything useful on legacy-free ia64?  I wouldn't think people
ever set IRQs or IO addresses by hand after bootup.

-- 
Martin 

-
To unsubscribe from this list: send the line "unsubscribe linux-ia64" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Received on Tue Apr 13 19:58:53 2004

This archive was generated by hypermail 2.1.8 : 2005-08-02 09:20:25 EST