ACPI Test Report for 2.4 ia64 kernel + latest ACPI ========================= Hardware Configuration: ----------------------- System Name: ACPI-LION System Type: 4 way 800M Itanium, Lion M/B revision: N/A Processor version: N/A Firmware Versions: N/A I/O configuration summary: QLogic QLA12160, Seagate ST39205LC boot drive IDE floppy and CDROM Serial console PS/2 keyboard and mouse USB mouse Ethernet Pro 100 Software Configuration: ----------------------- 1.Bk pull form lia64.bkbits.net/linux-ia64-2.4 on 1/14(Shanghai time) 2.Bk pull from linux-acpi.bkbits.net/linux-acpi-test-2.4.22 on 1/14 (Shanghai time) ACPI Features Tested: (prioritized). -------------------- 1. Boot off SCSI disk tested ok 2. PS/2 keyboard tested ok 3. ATI (run X window system) tested ok 4. PS/2 mouse tested ok 5. USB mouse Doesn't work (Both CONFIG_USB_UHCI_ALT and CONFIG_USB_UHCI failed) 6. NIC (eg. Ping or ftp) tested ok 7. IDE (eg. r/w floppy or CDROM) tested ok 8. SCI (eg. Press power button) tested ok 9. Soft Power off tested ok 10. serial console tested ok CPU0 CPU1 CPU2 32: 520 2 1 IO-SAPIC-edge keyboard 33: 265 4 0 IO-SAPIC-edge ide1 34: 61 33 0 IO-SAPIC-edge ide0 36: 1697 0 0 IO-SAPIC-edge PS/2 Mouse 39: 4 0 0 IO-SAPIC-level acpi 44: 4 4 0 IO-SAPIC-edge serial 45: 12 6 0 IO-SAPIC-edge serial 48: 28 2 0 IO-SAPIC-level usb-uhci 49: 177 16 8 IO-SAPIC-level eth0 51: 6430 369 57 IO-SAPIC-level qla1280 239: 262885 243712 261627 LSAPIC timer 254: 17 37 52 LSAPIC IPI NMI: 0 0 0 ERR: 0 Problems: 1.alloc 0x0-0xcf7 from PCI IO for PCI Bus 00:00 failed Please refer to http://bugme.osdl.org/show_bug.cgi?id=1535 2.PCI: no interrupt route for 00:00:03 pin B Please refer to http://bugme.osdl.org/show_bug.cgi?id=1534 3. USB mouse doesn't work. Ps. log is attached <<2.4.ZIP>> - To unsubscribe from this list: send the line "unsubscribe linux-ia64" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
This archive was generated by hypermail 2.1.8 : 2005-08-02 09:20:21 EST