When I try to run 2.6.0-test9 on an HP Everest I can't get USB working. All I get is this: drivers/usb/core/usb.c: registered new driver hub PCI: Found IRQ 52 for device 0000:01:04.0 IOSAPIC: vector 52 -> CPU 0x0200, enabled ohci_hcd 0000:01:04.0: OHCI Host Controller ohci_hcd 0000:01:04.0: irq 52, pci mem c000000088032000 ohci_hcd 0000:01:04.0: new USB bus registered, assigned bus number 1 drivers/usb/core/config.c: invalid configuration descriptor usb usb1: can't read configurations, error -22 ohci_hcd 0000:01:04.0: can't register root hub for usb1, -22 ohci_hcd 0000:01:04.0: can't start ohci_hcd 0000:01:04.0: remove, state 0 ohci_hcd 0000:01:04.0: USB bus 1 deregistered ohci_hcd: probe of 0000:01:04.0 failed with error -16 PCI: Found IRQ 53 for device 0000:01:04.1 IOSAPIC: vector 53 -> CPU 0x0300, enabled ohci_hcd 0000:01:04.1: OHCI Host Controller ohci_hcd 0000:01:04.1: irq 53, pci mem c000000088031000 ohci_hcd 0000:01:04.1: new USB bus registered, assigned bus number 1 drivers/usb/core/config.c: invalid configuration descriptor usb usb1: can't read configurations, error -22 ohci_hcd 0000:01:04.1: can't register root hub for usb1, -22 ohci_hcd 0000:01:04.1: can't start ohci_hcd 0000:01:04.1: remove, state 0 ohci_hcd 0000:01:04.1: USB bus 1 deregistered ohci_hcd: probe of 0000:01:04.1 failed with error -16 PCI: Found IRQ 54 for device 0000:01:04.2 IOSAPIC: vector 54 -> CPU 0x0000, enabled ehci_hcd 0000:01:04.2: EHCI Host Controller ehci_hcd 0000:01:04.2: irq 54, pci mem c000000088030000 ehci_hcd 0000:01:04.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:01:04.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Jun-13 drivers/usb/core/config.c: invalid configuration descriptor usb usb1: can't read configurations, error -22 ehci_hcd 0000:01:04.2: can't register root hub for usb1, -22 ehci_hcd 0000:01:04.2: remove, state 0 modprobe[987]: NaT consumption 17179869216 [1] Pid: 987, CPU 1, comm: modprobe psr : 0000101008022018 ifs : 8000000000000690 ip : [<a000000200178440>] Not tainted ip is at scan_async+0xa0/0x340 [ehci_hcd] unat: 0000000000000000 pfs : 0000000000000308 rsc : 0000000000000003 rnat: fffffffff5955559 bsps: a000000100306e70 pr : fffffffff5952659 ldrs: 0000000000000000 ccv : 0000000000000000 fpsr: 0009804c8a70433f csd : 0000000000000000 ssd : 0000000000000000 b0 : a00000020017dbe0 b6 : a000000100002d70 b7 : a000000100174fe0 f6 : 000000000000000000000 f7 : 0ffdca200000000000000 f8 : 100028000000000000000 f9 : 10002a000000000000000 f10 : 0fffeccccccccc8c00000 f11 : 1003e0000000000000000 r1 : a000000200370000 r2 : 0000000000000000 r3 : 0000000000000000 r8 : 0000000000000000 r9 : 0000000000000000 r10 : 0000000000000000 r11 : 0000000000000050 r12 : e00000087d147da0 r13 : e00000087d140000 r14 : 0000000000000001 r15 : 0000000000000000 r16 : a0000001007000c8 r17 : 0000000000002d35 r18 : 0000000000000001 r19 : 0000000000000000 r20 : e0000008721a5780 r21 : e0000040fa7305a8 r22 : a0000001007000c8 r23 : e0000040fa7306a8 r24 : e0000040fa7306a0 r25 : 0000000000000008 r26 : 0000000000000000 r27 : a0000001007000d8 r28 : a00000020017d170 r29 : a0000001007a7d20 r30 : 0000000000000000 r31 : e00000087dcca800 Call Trace: [<a00000010001afc0>] show_stack+0x80/0xa0 sp=e00000087d147900 bsp=e00000087d1413c8 [<a00000010003f040>] die+0x180/0x220 sp=e00000087d147ad0 bsp=e00000087d141390 [<a00000010003fd30>] ia64_fault+0x110/0xa40 sp=e00000087d147ad0 bsp=e00000087d141348 [<a000000100013040>] ia64_leave_kernel+0x0/0x260 sp=e00000087d147bd0 bsp=e00000087d141348 [<a000000200178440>] scan_async+0xa0/0x340 [ehci_hcd] sp=e00000087d147da0 bsp=e00000087d1412c8 [<a00000020017dbe0>] ehci_work+0x80/0x240 [ehci_hcd] sp=e00000087d147da0 bsp=e00000087d141298 [<a00000020017d1b0>] ehci_stop+0x250/0x460 [ehci_hcd] sp=e00000087d147da0 bsp=e00000087d141268 [<a000000200469e30>] usb_hcd_pci_remove+0x170/0x3c0 [usbcore] sp=e00000087d147df0 bsp=e00000087d141228 [<a000000200469c20>] usb_hcd_pci_probe+0x8a0/0x940 [usbcore] sp=e00000087d147e00 bsp=e00000087d141198 [<a00000010026c9c0>] pci_device_probe_static+0xc0/0x120 sp=e00000087d147e10 bsp=e00000087d141168 [<a00000010026cac0>] __pci_device_probe+0xa0/0xe0 sp=e00000087d147e10 bsp=e00000087d141140 [<a00000010026cb50>] pci_device_probe+0x50/0xa0 sp=e00000087d147e10 bsp=e00000087d141118 [<a00000010030d7a0>] bus_match+0xc0/0x120 sp=e00000087d147e10 bsp=e00000087d1410e0 [<a00000010030db00>] driver_attach+0x120/0x1e0 sp=e00000087d147e10 bsp=e00000087d1410a8 [<a00000010030e200>] bus_add_driver+0x100/0x1a0 sp=e00000087d147e10 bsp=e00000087d141070 [<a00000010030ea80>] driver_register+0xc0/0xe0 sp=e00000087d147e10 bsp=e00000087d141050 [<a00000010026d0a0>] pci_register_driver+0xe0/0x120 sp=e00000087d147e30 bsp=e00000087d141028 [<a0000002000a8120>] init+0xa0/0x120 [ehci_hcd] sp=e00000087d147e30 bsp=e00000087d141000 [<a0000001000d5970>] sys_init_module+0x390/0x680 sp=e00000087d147e30 bsp=e00000087d140f80 [<a000000100012ec0>] ia64_ret_from_syscall+0x0/0x20 sp=e00000087d147e30 bsp=e00000087d140f80 And then the machine is dead. Any ideas? Andreas. -- Andreas Schwab, SuSE Labs, schwab@suse.de SuSE Linux AG, Deutschherrnstr. 15-19, D-90429 Nürnberg Key fingerprint = 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5 "And now for something completely different." - To unsubscribe from this list: send the line "unsubscribe linux-ia64" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.htmlReceived on Wed Nov 12 10:42:46 2003
This archive was generated by hypermail 2.1.8 : 2005-08-02 09:20:20 EST