Re: [DMESG] cpumask_t in action

From: Jes Sorensen <>
Date: 2003-11-07 07:11:48
>>>>> "Matthew" == Matthew Wilcox <> writes:

Matthew> On Wed, Nov 05, 2003 at 02:22:02PM -0800, Jesse Barnes wrote:

Matthew> There's a number of things here that annoy me.  One is the
Matthew> stupid "Processor 8192/1 is spinning up".  I would expect
Matthew> "Processor 2/96 is spinning up", but why have this line at
Matthew> all?  I'd also like to see "Bringing up 3", "Processor 1 has
Matthew> spun up..." and "CPU 1 IS NOW UP!" go away.  That'd cut us
Matthew> down to:

>> CPU 3: 61 virtual and 50 physical address bits CPU 3: nasid 2,
>> slice 2, cnode 1 CPU 3: base freq=200.000MHz, ITC ratio=15/2, ITC
>> freq=1500.000MHz+/--1ppm Calibrating delay loop... 2241.08 BogoMIPS
>> CPU3: CPU has booted.  Starting migration thread for cpu 3

Matthew> A 40% reduction in per-cpu verbosity ;-)

Why not turn it the other way and just report the success of booted
CPUs and more detailed results for the CPUs that failed? I know there
are cases where you want the debug info in case of tracking kernel
bugs, but one could stick a compile time debug flag into the code for
that case, 960 - 40% = 576 lines of guff is still way too much IMHO,
especially over a serial console.

To unsubscribe from this list: send the line "unsubscribe linux-ia64" in
the body of a message to
More majordomo info at
Received on Thu Nov 6 15:13:49 2003

This archive was generated by hypermail 2.1.8 : 2005-08-02 09:20:20 EST