Re: [Linux-ia64] 2.4.20 / DIG

From: Jes Sorensen <jes_at_wildopensource.com>
Date: 2003-03-12 07:21:21
>>>>> "Bjorn" == Bjorn Helgaas <bjorn_helgaas@hp.com> writes:

Bjorn> It's not know to me, at least.  Any chance you can use a serial
Bjorn> console to capture the output?  You could also check for MCA log
Bjorn> information -- that's a likely cause of an early reboot.  You
Bjorn> don't say what box you have, but typically you can go to the EFI
Bjorn> shell and use something like "errdump mca".

Ok, got the serial console stuff going. Output attached at the end.

It looks like it blows up right after the EFI Variables thing. As far as
I can see everything looks perfectly normal, until it explodes.

Any ideas?

Cheers,
Jes


ELILO boot: 
kernel     is  'vmlinuz-2.4.20'
arguments  are 'root=/dev/sda7 console=ttyS0,115200n8 console=tty0 ro'
Using gzip_elf64 loader
Uncompressing Linux... done
Linux version 2.4.20 (jes@itanic) (gcc version 3.0.2 20010928 (prerelease)) #133EFI v1.02 by INTEL: SALsystab=0x3ff236b0 ACPI=0x3ffd9f80 ACPI 2.0=0xe2000 MPS=00CPU 0: mapping PAL code [0x3ff40000-0x3ff7b000) into [0xe00000003c000000-0xe000)efi.trim_bottom: ignoring 540KB of memory at 0x1000 due to granule hole at 0x0
efi.trim_bottom: ignoring 64512KB of memory at 0x100000 due to granule hole at 0SAL v2.90: oem=INTEL   MSL     REF     SAL     , product=
SAL: entry: pal_proc=0x3ff48010, sal_proc=0x3fe46d90
SAL: Platform features BusLock IRQ_Redirection 
SAL: AP wakeup using external interrupt vector 0xf0
CPU 0: 51 virtual and 44 physical address bits
ACPI: RSDP (v002 Intel                      ) @ 0x00000000000e2000
ACPI: XSDT (v001 Intel  W460GXBS 00000.00001) @ 0x000000003ffd8030
ACPI: FADT (v003 Intel  W460GXBS 00000.00002) @ 0x000000003ffd8068
ACPI: MADT (v001 Intel  W460GXBS 00000.00000) @ 0x000000003ffd9ec0
ACPI: Local APIC address 0xc0000000fee00000
ACPI: LSAPIC (acpi_id[0x00] lsapic_id[0x00] lsapic_eid[0x00] enabled)
CPU 0 (0x0000) enabled (BSP)
ACPI: LSAPIC (acpi_id[0x01] lsapic_id[0x03] lsapic_eid[0x00] enabled)
CPU 1 (0x0300) enabled
ACPI: IOSAPIC (id[0x2] global_irq_base[0x0] address[00000000fec00000])
iosapic_init: Disabling PC-AT compatible 8259 interrupts
IOSAPIC: version 2.1, address 0xfec00000, GSIs 0x0-0x3f
ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x21] polarity[0x3] trigger[0x3])
register_intr: changing vector 39 from IO-SAPIC-edge to IO-SAPIC-level
2 CPUs available, 2 CPUs total
Mca related initialization done
On node 0 totalpages: 60523
zone(0): 60523 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=scsi0:/vmlinuz-2.4.20 root=/dev/sda7 console=ttoFPSWA interface at 0x3f146010, revision 1.6
CPU 0: base freq=133.324MHz, ITC ratio=11/2, ITC freq=733.283MHz
Console: colour VGA+ 80x25
Calibrating delay loop... 730.88 BogoMIPS
Placing software IO TLB between 0xe000000004008000 - 0xe000000004208000
Memory: 953920k/968368k available (3890k code, 14448k reserved, 2549k data, 192)Dentry cache hash table entries: 65536 (order: 6, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 6, 1048576 bytes)
Mount-cache hash table entries: 16384 (order: 4, 262144 bytes)
Buffer-cache hash table entries: 65536 (order: 5, 524288 bytes)
Page-cache hash table entries: 65536 (order: 5, 524288 bytes)
POSIX conformance testing by UNIFIX
Boot processor id 0x0/0x0
SMP: starting up secondaries.
CPU 1: mapping PAL code [0x3ff40000-0x3ff7b000) into [0xe00000003c000000-0xe000)CPU 1: 51 virtual and 44 physical address bits
CPU 1: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 519 cycles)
CPU 1: base freq=133.324MHz, ITC ratio=11/2, ITC freq=733.283MHz
Calibrating delay loop... 730.88 BogoMIPS
CPU1: CPU has booted.
Before bogomips.
Total of 2 processors activated (1460.76 BogoMIPS).
Waiting on wait_init_idle (map = 0x2)
All processors have done init_idle
ACPI: Subsystem revision 20020517
PCI: Using SAL to access configuration space
ACPI: Interpreter enabled
ACPI: Using IOSAPIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
ACPI: PCI Root Bridge [PCI1] (00:01)
ACPI: PCI Root Bridge [PCI2] (00:02)
ACPI: PCI Root Bridge [PCI3] (00:03)
ACPI: PCI Root Bridge [CBN] (00:04)
PCI->APIC IRQ transform: (00:01.0 INTA) -> CPU 0x0000 vector 48
PCI->APIC IRQ transform: (00:02.0 INTA) -> CPU 0x0000 vector 49
PCI->APIC IRQ transform: (00:03.2 INTD) -> CPU 0x0000 vector 50
PCI->APIC IRQ transform: (00:03.3 INTB) -> CPU 0x0000 vector 51
PCI->APIC IRQ transform: (00:04.0 INTA) -> CPU 0x0000 vector 52
PCI->APIC IRQ transform: (00:05.0 INTA) -> CPU 0x0000 vector 53
PCI->APIC IRQ transform: (01:00.0 INTA) -> CPU 0x0000 vector 54
PCI->APIC IRQ transform: (01:02.0 INTA) -> CPU 0x0000 vector 55
PCI->APIC IRQ transform: (01:02.1 INTB) -> CPU 0x0000 vector 56
PCI->APIC IRQ transform: (01:0f.0 INTA) -> CPU 0x0000 vector 57
PCI->APIC IRQ transform: (02:00.0 INTA) -> CPU 0x0000 vector 58
PCI->APIC IRQ transform: (02:0f.0 INTA) -> CPU 0x0000 vector 59
PCI->APIC IRQ transform: (03:00.0 INTA) -> CPU 0x0000 vector 60
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
perfmon: version 1.2 IRQ 238
perfmon: 14 PMCs, 18 PMDs, 4 counters (32 bits)
PAL Information Facility v0.5
EFI Variables Facility v0.05 2002-Mar-26
Received on Tue Mar 11 12:21:34 2003

This archive was generated by hypermail 2.1.8 : 2005-08-02 09:20:12 EST