Re: [Linux-ia64] [PATCH] 2.5.18 early printk, PCI segment, multi-IOMMU support

From: David Mosberger <davidm_at_napali.hpl.hp.com>
Date: 2002-07-23 15:43:01
>>>>> On Mon, 22 Jul 2002 16:22:30 -0600, Bjorn Helgaas <bjorn_helgaas@hp.com> said:

  Bjorn> Tested on HP ZX1 and i2000.

  Bjorn> 10_early_printk.diff Early printk for MMIO UARTs.  UART
  Bjorn> address from HCDP or specified in config.

  Bjorn> 30_sci.diff Add acpi_irq_to_vector() to handle both legacy
  Bjorn> ISA and new GSI interrupt numbers.  Add support for SCI on
  Bjorn> GSI interrupt.

  Bjorn> 40_pcibios_segment.diff Add struct pci_controller for IA64
  Bjorn> sysdata.  Stash the PCI segment there and add support in
  Bjorn> config accessors.

  Bjorn> 50_iosapic_segment.diff Add segment support for PCI
  Bjorn> interrupts.

The above look fine to me.  I'm not really an ACPI expert so if
anybody has an issue with these (particularly the latter three), speak
up.

  Bjorn> 60_pci_tra.diff Add support for PCI root bridges with
  Bjorn> non-zero translation offsets.

This one handles only memory offsets.  Any particular reason for this?
Perhaps there should be at least a check which will warn/panic if a
non-zero I/O offset is found?

  Bjorn> 70_enable_device.diff Add a platform vector for
  Bjorn> pci_enable_device().  ZX1 needs this to associate a device
  Bjorn> with the correct IOMMU.

Hmmh, are you expecting other platform-specific work will have to be
done in pci_enable_device() in the future?  If all we really need here
is a platform-specific PCI-device -> IOMMU mapping, perhaps we should
call it just that.  OTOH, I can see that this is a natural callback
point.  Any comments by folks doing the hw support for other
(hotplug-capable) machines?

	--david
Received on Mon Jul 22 22:45:06 2002

This archive was generated by hypermail 2.1.8 : 2005-08-02 09:20:09 EST