On Fri, Sep 08, 2000 at 11:51:50PM -0700, David Mosberger wrote: > The latest IA-64 kernel diff is now available at: > > ftp://ftp.kernel.org/pub/linux/kernel/ports/ia64/ > > in file linux-2.4.0-test8-ia64-000908.diff.gz. The most important > changes since the previous version: > > > The patch below is once again a rough approximation of what changed > since the last update. This kernel has been tested on the HP Ski > simulator, Big Sur (UP and MP), and Lion (MP). > I tried it on my UP Big Sur with BIOS Build 59 and B1 stepping CPU. It didn't work. I got Unexpected irq vector 0x0 on CPU 0! as soon as it booted. I am enclosing my .config here. BTW, the kernel from the 0828 Turbo Linux booted fine. I am enclosing the boot message here also. Any ideas? Thanks. H.J. --- Linux version 2.4.0test7-000823-42 (root@borg) (gcc version 2.9-ia64-000216-final) #1 Sat Aug 26 16:31:32 PDT 2000 EFI v0.99 by INTEL: SALsystab=0x3ff25340 ACPI=0x3ffd9160 MPS=0x3ffd0000 SMBIOS=0xf0010 efi_map_pal_code: mapping PAL code [0x3ff40000-0x3ff7b000) into [0xe00000003fc00000-0xe000000040000000) SAL v2.112: ia32bios=absent, oem=, product=SAL sal[0] - entry: pal_proc=0x3ff48010, sal_proc=0x3fe54730 SAL: Platform features BusLock processor implements 51 virtual and 44 physical address bits ACPI: Intel RSDT 0.0 Acpi cfg:bind to Boot time Acpi OSD Acpi cfg:acpi initialize pass Acpi cfg:acpi load firmware tables pass Acpi cfg:acpi load namespace pass CPU 0 (0000:0000): Available. IOSAPIC Version 2.1: address 0xfec00000 IRQs 0x0 - 0x3f Acpi cfg:get pci vectors Acpi cfg:_STA not found: pci bus 0 exist Acpi cfg:_STA not found: pci bus 1 exist Acpi cfg:_STA not found: pci bus 2 exist Acpi cfg:_STA not found: pci bus 3 exist 1 CPUs available, 1 CPUs total ACPI: -0550: <7>ACPI: *** Success: Entire namespace and objects deleted Acpi cfg:acpi terminate pass Acpi cfg:bind to Run time Acpi OSD ia64_mca_init : begin ia64_mca_init : registered mca rendezvous spinloop and wakeup mech. ia64_mca_init : correctable mca vector setup done ia64_mca_init : registered os mca handler with SAL ia64_mca_init : os init handler at 5414b0 ia64_mca_init : registered os init handler with SAL ia64_mca_init : platform-specific mca handling setup done Mca related initialization done On node 0 totalpages: 64672 zone(0): 64672 pages. zone(1): 0 pages. zone(2): 0 pages. Placing software IO TLB between 0xe000000000100000 - 0xe000000000300000 Kernel command line: root=/dev/sda2 init=/bin/bash fpswa interface at 3f197010 timer: CPU 0 base freq=133.344MHz, ITC ratio=10/2, ITC freq=666.722MHz Console: colour VGA+ 80x25 Unexpected irq vector 0x0 on CPU 0! Calibrating delay loop... 545.26 BogoMIPS Memory: 1017312k/1034752k available (4064k code, 16368k reserved, 1382k data, 320k init) Initialized perfmon vector to 40 Dentry-cache hash table entries: 65536 (order: 6, 1048576 bytes) Buffer-cache hash table entries: 65536 (order: 5, 524288 bytes) Page-cache hash table entries: 65536 (order: 5, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 1048576 bytes) POSIX conformance testing by UNIFIX PCI: Probing PCI hardware PCI->APIC IRQ transform: (B0,I1,P0) -> 23 PCI->APIC IRQ transform: (B0,I3,P3) -> 2f PCI->APIC IRQ transform: (B0,I3,P1) -> 2e PCI->APIC IRQ transform: (B0,I4,P0) -> 2d PCI->APIC IRQ transform: (B0,I5,P0) -> 2c PCI->APIC IRQ transform: (B1,I1,P0) -> 17 PCI->APIC IRQ transform: (B1,I15,P0) -> 38 PCI->APIC IRQ transform: (B2,I0,P0) -> 1b PCI->APIC IRQ transform: (B2,I15,P0) -> 39 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 16384 buckets, 256Kbytes TCP: Hash tables configured (established 131072 bind 65536) Initializing RT netlink socket PAL Information Facility v0.3 Starting kswapd v1.7 pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: registered device at major 7 loop: enabling 8 loop devices Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 19 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide1: BM-DMA at 0x1098-0x109f, BIOS settings: hdc:pio, hdd:pio hdc: LTN483, ATAPI CDROM drive hdd: LS-120 F200 08 UHD Floppy, ATAPI FLOPPY drive ide1 at 0x170-0x177,0x376 on irq 65 hdc: ATAPI 48X CD-ROM drive, 120kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.11 hdd: 123264kB, 963/8/32 CHS, 533 kBps, 512 sector size, 720 rpm md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12 linear personality registered raid0 personality registered raid1 personality registered raid5 personality registered raid5: measuring checksumming speed 8regs : 712.448 MB/sec 32regs : 1149.632 MB/sec using fastest function: 32regs (1149.632 MB/sec) md.c: sizeof(mdp_super_t) = 4096 LVM version 0.8final by Heinz Mauelshagen (15/02/2000) lvm -- Driver successfully initialized qla1280: detect() found an HBA qla1280: VID=1077 DID=1280 SSVID=1077 SSDID=6 scsi(0): Determining if RISC is loaded... scsi(0): Verifying chip... scsi(0): Setup chip... scsi(0): Configure NVRAM parameters... scsi(0): Resetting SCSI BUS (0) scsi(0): Resetting SCSI BUS (1) scsi0 : QLogic QLA1280 PCI to SCSI Host Adapter: bus 1 device 1 irq 23 Firmware version: 8.13.08, Driver version 3.16 Beta ---- # # Automatically generated make config: don't edit # # # Code maturity level options # CONFIG_EXPERIMENTAL=y # # Loadable module support # CONFIG_MODULES=y CONFIG_MODVERSIONS=y CONFIG_KMOD=y # # General setup # CONFIG_IA64=y CONFIG_SWIOTLB=y # CONFIG_ISA is not set # CONFIG_SBUS is not set # CONFIG_IA64_GENERIC is not set CONFIG_IA64_DIG=y # CONFIG_IA64_HP_SIM is not set # CONFIG_IA64_SGI_SN1_SIM is not set # CONFIG_IA64_PAGE_SIZE_4KB is not set # CONFIG_IA64_PAGE_SIZE_8KB is not set CONFIG_IA64_PAGE_SIZE_16KB=y # CONFIG_IA64_PAGE_SIZE_64KB is not set CONFIG_ITANIUM=y CONFIG_IA64_BRL_EMU=y # CONFIG_ITANIUM_ASTEP_SPECIFIC is not set CONFIG_ITANIUM_BSTEP_SPECIFIC=y # CONFIG_ITANIUM_B0_SPECIFIC is not set # CONFIG_IA64_HAVE_IRQREDIR is not set # CONFIG_ITANIUM_PTCG is not set # CONFIG_IA64_SOFTSDV_HACKS is not set # CONFIG_IA64_AZUSA_HACKS is not set CONFIG_IA64_MCA=y CONFIG_SKB_BELOW_4GB=y CONFIG_ACPI_KERNEL_CONFIG=y CONFIG_PM=y CONFIG_ACPI=y CONFIG_ACPI_INTERPRETER=y CONFIG_KCORE_ELF=y # CONFIG_SMP is not set CONFIG_PERFMON=y CONFIG_IA64_PALINFO=y CONFIG_NET=y CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_SYSCTL=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_PCI=y CONFIG_PCI_NAMES=y CONFIG_HOTPLUG=y # # PCMCIA/CardBus support # # CONFIG_PCMCIA is not set # # Parallel port support # # CONFIG_PARPORT is not set # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_NETLINK=y # CONFIG_RTNETLINK is not set CONFIG_NETLINK_DEV=y CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_FILTER=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_INET_ECN is not set CONFIG_SYN_COOKIES=y # # IP: Netfilter Configuration # CONFIG_IP_NF_CONNTRACK=m CONFIG_IP_NF_FTP=m CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_LIMIT=m CONFIG_IP_NF_MATCH_MAC=m CONFIG_IP_NF_MATCH_MARK=m CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_STATE=m CONFIG_IP_NF_MATCH_UNCLEAN=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_MIRROR=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_MARK=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_COMPAT_IPCHAINS=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_COMPAT_IPFWADM=m CONFIG_IP_NF_NAT_NEEDED=y # CONFIG_IPV6 is not set # CONFIG_KHTTPD is not set # CONFIG_ATM is not set # # # # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_LLC is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Plug and Play configuration # # CONFIG_PNP is not set # CONFIG_ISAPNP is not set # # Block devices # # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_DEV_DAC960 is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_LVM=y CONFIG_LVM_PROC_FS=y # CONFIG_BLK_DEV_MD is not set # CONFIG_MD_LINEAR is not set # CONFIG_MD_RAID0 is not set # CONFIG_MD_RAID1 is not set # CONFIG_MD_RAID5 is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y # # I2O device support # # CONFIG_I2O is not set # CONFIG_I2O_PCI is not set # CONFIG_I2O_BLOCK is not set # CONFIG_I2O_LAN is not set # CONFIG_I2O_SCSI is not set # CONFIG_I2O_PROC is not set # # ATA/IDE/MFM/RLL support # CONFIG_IDE=y # # IDE, ATA and ATAPI Block devices # CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set # CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set # CONFIG_BLK_DEV_IDEDISK_VENDOR is not set # CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set # CONFIG_BLK_DEV_IDEDISK_IBM is not set # CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set # CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set # CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set # CONFIG_BLK_DEV_IDEDISK_WD is not set # CONFIG_BLK_DEV_COMMERIAL is not set # CONFIG_BLK_DEV_TIVO is not set # CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set CONFIG_BLK_DEV_IDEFLOPPY=y # CONFIG_BLK_DEV_IDESCSI is not set # # IDE chipset support/bugfixes # # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_CMD640_ENHANCED is not set # CONFIG_BLK_DEV_ISAPNP is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_IDEDMA_PCI_AUTO is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_PCI_WIP is not set # CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_AEC62XX_TUNING is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_WDC_ALI15X3 is not set # CONFIG_BLK_DEV_AMD7409 is not set # CONFIG_AMD7409_OVERRIDE is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_HPT34X_AUTODMA is not set # CONFIG_BLK_DEV_HPT366 is not set CONFIG_BLK_DEV_PIIX=y # CONFIG_PIIX_TUNING is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_PDC202XX is not set # CONFIG_PDC202XX_BURST is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_CHIPSETS is not set # CONFIG_IDEDMA_AUTO is not set # CONFIG_IDEDMA_IVB is not set # CONFIG_DMA_NONPCI is not set CONFIG_BLK_DEV_IDE_MODES=y # # SCSI support # CONFIG_SCSI=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_SD_EXTRA_DEVS=40 CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_SR_EXTRA_DEVS=2 CONFIG_CHR_DEV_SG=y # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_DEBUG_QUEUES=y # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set CONFIG_SCSI_AIC7XXX=y # CONFIG_AIC7XXX_TCQ_ON_BY_DEFAULT is not set CONFIG_AIC7XXX_CMDS_PER_DEVICE=8 # CONFIG_AIC7XXX_PROC_STATS is not set CONFIG_AIC7XXX_RESET_DELAY=5 # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set CONFIG_SCSI_MEGARAID=y # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_DMA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_NCR53C7xx is not set # CONFIG_SCSI_NCR53C8XX is not set # CONFIG_SCSI_SYM53C8XX is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_DEBUG is not set # # Network device support # CONFIG_NETDEVICES=y # # ARCnet devices # # CONFIG_ARCNET is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_ETHERTAP is not set # CONFIG_NET_SB1000 is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_NET_ISA is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set # CONFIG_CS89x0 is not set # CONFIG_DE4X5 is not set CONFIG_TULIP=y # CONFIG_DGRS is not set # CONFIG_DM9102 is not set CONFIG_EEPRO100=y # CONFIG_EEPRO100_PM is not set # CONFIG_LNE390 is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_NE3210 is not set # CONFIG_RTL8129 is not set # CONFIG_8139TOO is not set # CONFIG_SIS900 is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_ES3210 is not set # CONFIG_EPIC100 is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_YELLOWFIN is not set CONFIG_ACENIC=y # CONFIG_ACENIC_OMIT_TIGON_I is not set # CONFIG_SK98LIN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Token Ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set # # Wan interfaces # # CONFIG_WAN is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # CD-ROM drivers (not for SCSI or IDE/ATAPI drives) # # CONFIG_CD_NO_IDESCSI is not set # # Input core support # # CONFIG_INPUT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_SERIAL=y CONFIG_SERIAL_CONSOLE=y # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 # # I2C support # # CONFIG_I2C is not set # # Mice # # CONFIG_BUSMOUSE is not set CONFIG_MOUSE=y CONFIG_PSMOUSE=y # CONFIG_82C710_MOUSE is not set # CONFIG_PC110_PAD is not set # # Joysticks # # CONFIG_JOYSTICK is not set # # Input core support is needed for joysticks # # CONFIG_QIC02_TAPE is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_INTEL_RNG is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set CONFIG_EFI_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set CONFIG_AGP=y CONFIG_AGP_INTEL=y CONFIG_AGP_I810=y CONFIG_AGP_VIA=y CONFIG_AGP_AMD=y CONFIG_AGP_SIS=y CONFIG_AGP_ALI=y CONFIG_DRM=y # CONFIG_DRM_TDFX is not set # CONFIG_DRM_GAMMA is not set # CONFIG_DRM_R128 is not set # CONFIG_DRM_I810 is not set # CONFIG_DRM_MGA is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # File systems # # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=m # CONFIG_ADFS_FS is not set # CONFIG_ADFS_FS_RW is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BFS_FS is not set CONFIG_FAT_FS=y # CONFIG_MSDOS_FS is not set # CONFIG_UMSDOS_FS is not set CONFIG_VFAT_FS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_RAMFS is not set CONFIG_ISO9660_FS=y CONFIG_JOLIET=y # CONFIG_MINIX_FS is not set # CONFIG_NTFS_FS is not set # CONFIG_NTFS_RW is not set # CONFIG_HPFS_FS is not set CONFIG_PROC_FS=y # CONFIG_DEVFS_FS is not set # CONFIG_DEVFS_MOUNT is not set # CONFIG_DEVFS_DEBUG is not set CONFIG_DEVPTS_FS=y # CONFIG_QNX4FS_FS is not set # CONFIG_QNX4FS_RW is not set CONFIG_ROMFS_FS=y CONFIG_EXT2_FS=y # CONFIG_SYSV_FS is not set # CONFIG_SYSV_FS_WRITE is not set # CONFIG_UDF_FS is not set # CONFIG_UDF_RW is not set # CONFIG_UFS_FS is not set # CONFIG_UFS_FS_WRITE is not set # # Network File Systems # # CONFIG_CODA_FS is not set CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_ROOT_NFS is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y CONFIG_SUNRPC=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y # CONFIG_SMB_FS is not set # CONFIG_NCP_FS is not set # CONFIG_NCPFS_PACKET_SIGNING is not set # CONFIG_NCPFS_IOCTL_LOCKING is not set # CONFIG_NCPFS_STRONG is not set # CONFIG_NCPFS_NFS_NS is not set # CONFIG_NCPFS_OS2_NS is not set # CONFIG_NCPFS_SMALLDOS is not set # CONFIG_NCPFS_MOUNT_SUBDIR is not set # CONFIG_NCPFS_NDS_DOMAINS is not set # CONFIG_NCPFS_NLS is not set # CONFIG_NCPFS_EXTRAS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_NLS=y # # Native Language Support # CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_950 is not set CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=m # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_UTF8 is not set # # Console drivers # CONFIG_VGA_CONSOLE=y # # Frame-buffer support # # CONFIG_FB is not set # # Sound # CONFIG_SOUND=y CONFIG_SOUND_CMPCI=y CONFIG_SOUND_CMPCI_SPDIFLOOP=y CONFIG_SOUND_CMPCI_4CH=y CONFIG_SOUND_CMPCI_REAR=y CONFIG_SOUND_EMU10K1=y # CONFIG_SOUND_FUSION is not set CONFIG_SOUND_ES1370=y CONFIG_SOUND_ES1371=y CONFIG_SOUND_ESSSOLO1=y CONFIG_SOUND_MAESTRO=y CONFIG_SOUND_SONICVIBES=y CONFIG_SOUND_TRIDENT=y # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set # CONFIG_SOUND_VIA82CXXX is not set # CONFIG_SOUND_OSS is not set # CONFIG_SOUND_TVMIXER is not set # # USB support # CONFIG_USB=y CONFIG_USB_DEBUG=y # # Miscellaneous USB options # # CONFIG_USB_DEVICEFS is not set # CONFIG_USB_BANDWIDTH is not set # # USB Controllers # CONFIG_USB_UHCI_ALT=y # CONFIG_USB_OHCI is not set # # USB Devices # CONFIG_USB_PRINTER=y CONFIG_USB_SCANNER=y CONFIG_USB_MICROTEK=y CONFIG_USB_AUDIO=y CONFIG_USB_ACM=y CONFIG_USB_SERIAL=y CONFIG_USB_SERIAL_GENERIC=y CONFIG_USB_SERIAL_VISOR=y CONFIG_USB_SERIAL_WHITEHEAT=y CONFIG_USB_SERIAL_FTDI_SIO=y CONFIG_USB_SERIAL_KEYSPAN_PDA=y CONFIG_USB_SERIAL_KEYSPAN=y # CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set # CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set # CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set # CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set # CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set CONFIG_USB_SERIAL_DIGI_ACCELEPORT=y CONFIG_USB_SERIAL_OMNINET=y CONFIG_USB_SERIAL_DEBUG=y # CONFIG_USB_IBMCAM is not set # CONFIG_USB_OV511 is not set CONFIG_USB_DC2XX=y CONFIG_USB_MDC800=y CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_USS720 is not set CONFIG_USB_DABUSB=y CONFIG_USB_PLUSB=y CONFIG_USB_PEGASUS=y CONFIG_USB_RIO500=y # CONFIG_USB_DSBR is not set CONFIG_USB_BLUETOOTH=y # # USB Human Interface Devices (HID) # # # Input core support is needed for USB HID # # # Kernel hacking # CONFIG_IA32_SUPPORT=y CONFIG_MATHEMU=y CONFIG_MAGIC_SYSRQ=y CONFIG_IA64_EARLY_PRINTK=y # CONFIG_IA64_DEBUG_CMPXCHG is not set # CONFIG_IA64_DEBUG_IRQ is not set CONFIG_IA64_PRINT_HAZARDS=y # CONFIG_IA64_NEW_UNWIND is not setReceived on Sat Sep 09 12:17:52 2000
This archive was generated by hypermail 2.1.8 : 2005-08-02 09:19:59 EST